15 janvier 2019

Free Download Volvo Visfed 0.3.2 and Activation

Classé dans : truck diagnostic tool — carsets @ 8 h 46 min

This is for those looking for working Volvo IS File ED Visfed software to work with Tech Tool for Volvo, Renault, Mack trucks reprogramming:
Volvo IS File ED – is a special software tool to decrypt, edit, encrypt ECU reload (also called intermediate storage) files for Volvo, Renault, Mack trucks. Tool is made to make all file rebuilding process as simple and easy as possible. It also allows to view ECU file and other information of part and sub part numbers, parameters, PID, PPID, SID, PSID, FMI. Checksum calculation possible of Intel HEX line and whole CSW file.
VISFED 0.3.2 requirement:
The VISFED 0.3.2 can be used with Volvo Tech Tool 2.5, 2.6 or newer versions
Tech Tool 2.6
Tech Tool 2.7
If your Tech tool doesn’t come from, pls contact us and engineers will help check your PTT to confirm whether the Visfed is working for you or not.
If you don’t have Tech Tool yet, you can get the bundle (Tech Tool + Visfed) – it will help save a lot:
VISFED operating systems:
VISFED Windows 7: Confirmed!
VISFED Windows 10: Confirmed!
For other systems, you may have no luck to install.
VISFED laptop requirement:






VISFED 0.3.2 activation and installation:
Free service via
The professionals will help you activate and install Visfed to work perfectly
No installation issues!
Supported service:

• Adding langauge.

• ECU reload with original software.

• Remove SCR and increase HP on: Volvo trucks (D9B, D11C, D13A, D13B, D13C, D16C, D16E engines).

• Remove SCR and increase HP on: Renault trucks (D11A, D11B, D11C, DXi13A engines).

Diagnostic kit can worked with PTT and visfed:
Volvo Diagnostic Kit (vocom 88890300)
Renault Diagnostic Kit (88840133)
MACK Diagnostic Kit (RP1210)
UD Diagnostic Kit (RP1210)
Good to know:
Volvo tech tool vs Dev2tool vs Visfed:
Visfed free version vs paid version:
you can get free Visfed when you buy Tech tool, but the function is limited.
Also, you may have luck to get a Visfed download link for free:
The paid version has powerful functions, including:
10000+ Flash files (Volvo Truck, UD, Penta, Volvo Ce, Mack, USTruck, Bus, Renault Truck) on Online Sever… and Updating Database

⦁ Get Orginal File From Volvo Server (Volvo Truck, UD, Penta, Volvo Ce,Mack,USTruck,Bus,Renault Truck)


Automaticly deactivate  ADBLUE off , EGR off, DPF off, NOX off on truck

AutomaticlyIncrase Horse Power

⦁Noxoff Files(Same Flash)

⦁Egroff Files (Same Flash)
⦁ SCR Files (Same Flash)
⦁ DPF Files (Same Flash)
⦁ Euro2 Files (Same Flash)
⦁ Euro3 Files (Same Flash)
⦁ Euro4 Files (Same Flash)
⦁ Euro5 Files (Same Flash)

⦁HpIncase Files

⦁Ecu’s Files for many ecu( Mid 128 ,140 ,130 etc)

⦁ See Flash Subdaset , Connected Vehicle Dataset and Compare Dataset.(Mid 128 ,Mid 140 See Language, Mid 130)

⦁Hextool (Whole Checksum, Linear Checksum ,ASCI>Hex,Hex>ASCI, File Linear Checsum)

⦁ Special Filter System On Online Flash ( Vehice specifications<brake,gearbox,aid,>,Hwid,MSW,DST1,DST2,CSW)

⦁ Auto Change Chassis ID on Hex (If whole checksum supported)

⦁Subdataset Editor (Only Change Subdatase Part no, and Name)

⦁ DST2,CSW Name Editor (Only ChangeDST2,CSW Part no, and Name)

⦁ Check Flash and Vehicle Parameter, and Parameter Count

⦁ XLM/TMP editor (Open own Xml and Tmp )

⦁ Auto Send all converted flash files directly in Techtool withoutmanual change chassis id or edited xml and interso.mdb….

And some interesting options:AdBlue/SCR/DPF/EGR/NOx Torque Reduction OFF.

Increase Horse Power.

Build Intel Hex file for chiptuning.

Recalculate Checksum of CSW.

VISFED 0.3.2 confirmed to work no issues:






XML editor


Chassis Editor


 Volvo Truck flash files 8400

Automatically converting and put flash file in Tech tool



17 décembre 2018

Free Download Volvo Premium Tech Tool PTT 2.7

Classé dans : truck diagnostic tool — carsets @ 7 h 51 min
(12-2018) Volvo/Renault/Mack Premium Tech Tool PTT is updated to version 2.7. Here are PPT and Dev tool free download links and released notes.
Part 1: Download Volvo Tech Tool 2.7 + Dev Tool
Premium Tech Tool install files from Volvo server.
These are the original files, no activation.
To be able to install these, you need to make your own installer or get one from Fang88 .
Maybe someone with skills can use it to make an activator.
Used Winrar 5.60 Beta x64 to make the archive.
If the first link doesn’t work, try the second one.
Good luck!
Props to Fang88 for directing me to the files
Password: chestertechsucks
DevTool for Tech Tool 2.7!cF8zyaKT!h10dbN01lwuonbXTt9EF5gsKP7rAwga2k3T41BmMOtM
IMPORTANT: this is customer share at the mhh forumIt’s personal – No one will hold any risk of what you’ll done!Keygen, activation, installation, security issues and the like might happen to you You’re advised to have a 100% tested version, confirmed with zero issues:
Tech Tool PTT 2.5.87 and Dev2tool 
Premium Tech Tool 2.04.87 Development 
Both versions can be good; you can use them with relief!
Part 2: Volvo Tech Tool 2.7 Released Notes
This news information gives you an overview of new features and changes in Tech Tool. Please take your time to read through this information carefully as it will support you in having full benefit of the tool.
For more information about functions and dialogues in Tech Tool, please see What’s new… and the Help file within the application.
  • – December 5, 2018
The release is available for download in Client Update from week 49, 2018.

Corrections and changes in the release

Corrections and changes in the release are listed below:
Description Company
Operation 3711-08-03-03 ‘Data Links, Fault Tracing with Oscilloscope’ has been updated to make it easier to evaluate CAN signal disturbance. VTC, RTC, VBC, MACK, UD, EICHER
NOx sensor values added in operation 25920-3/32589-08-03-02 ‘Exhaust aftertreatment system, service regeneration’.
Description Company
Improvements in operation 25846-3/2589-08-03-05 ‘SCR System, test’. VTC, RTC
The performance of operation 28308-3/2840-08-03-01 ‘Idle shutdown function check’ has been improved with new monitoring, status icons will be updated immediately opposed to a several seconds delay as it was before.
Description Company
A new symptom has been added; speed dependent driving level. VTC
Description Company
Updates of calibration operation for LPOS (lane position and object sensor camera) to support new EBS in Renault. RTC
Description Company
Tech Tool now supports fault tracing for the new 8L engine. UD
Description Company
Update of wiring in fault tracing for pre-heater relay for MD8L engine. VBC
Improvements and corrections to EU6 diagnostic information in operation 25456- 3/2545-08-03-02 ‘Exhaust Aftertreatment Diagnostics’.
Software download and calibration operations for the Generation 2 electrical bus are now available.
Fault tracing is now available for Generation 2 electrical bus for the following Electric Control Units;

·         Hybrid Powertrain Control Unit (HPCU)
·         Energy Storage Control Module (ESCM)
·         Powertrain Control Module (PCM)
·         Charging Interface Control Unit (CICU)
Description Company
Support for Motor Grader model: G9260. SDLG
Description Company
Support for Crawl Excavator model: EC200E. VCE
76001-3 ‘Extended axle locking function, check’ applicable for Wheel Excavator models: EW220E and EW240E MH
38335-3 ‘Displayed Machine hours, correction’ is now also applicable for Wheel Paver model: P4370B
D4J EU Stage V/US Tier 4 final support has been added for following models:

·         Compact Wheel Loader models: L45H and L50H.
·         Wheel Excavator models: EW140E, EWR150E and EWR170E
·         Soil Compactor models: SD115B, SD135B and SD160B
·         Asphalt Compactor models: DD110C, DD120C and DD140C
·         Track Paver models: P4820D
·         Crawl Excavator models: EC140E EC160E, EC180E, EC200E and ECR145E
D6J EU Stage V/US Tier 4 final support has been added for following models:

·         Wheel Loader models: L60H, L70H and L90H.
·         Wheel Excavator models: EW160E, EW180E, EW205E, EW220E and EW240E MH
·         Track Paver models: P5110B and P6820D
·         Wheel Paver model: P5170B
·         Crawl Excavator models: EC220E and ECR235E
Description Company
D8J EU Stage V/US Tier 4 final support has been added for following models:

·         Wheel Loader models: L110H and L120H
·         Track Paver models: P7110B and P7820D
·         Wheel Paver model: P7170B
·         Crawl Pipe Layer model: PL3005E
·         Crawl Excavator models: EC250E, EC300E & ECR355E
D13J EU Stage V/US Tier 4 final support has been added for following models:

·         Wheel Loader models: L150H, L180H, L220H and L260H
·         Articulated Hauler models: A35G and A40G
·         Crawl Excavator models: EC350E, EC380E and EC480E
·         Crawl Pipe Layer model: PL4809E
D16J EU Stage V/US Tier 4 final support has been added for following models:

·         Wheel Loader model: L350H
·         Articulated Hauler models: A45G and A60H
·         Crawl Excavator model: EC750E
D3.8H EU Stage V/US Tier 4 final support has been added for following model:

·         Soil Compactor model: SD75B
D3.3H EU Stage V/US Tier 4 final support has been added for following models:

·         Compact Wheel Loader models: L30G and L35G
·         Soil Compactor model: SD45B
D2.6H EU Stage V/US Tier 4 final support has been added for following models:

·         Compact Wheel Excavator model: EW60E
·         Compact Crawl Excavator model: EC60E
25402-3 ‘Particulate Control Diagnostics’ applicable for all models with

·         D2.6H, D3.3H and D3.8H EU Stage V/Tier 4 final engines.
·         D4J, D6J, D8J, D13J and D16J EU Stage V/US Tier 4 final engines.
Diagnostics support is added for Articulated Hauler model: A60H
Diagnostics support is added for Crawl Pipe Layer model: PL3005E

Important Information

Known issue
In Tech Tool 2.7.25, there is a known issue for operation 36652-3/3665-07-03-04 ‘Forward looking sensor, calibration’, selection B on road calibration. This issue affects the following products;
Products updated to comply with AEBS step 2 regulation.
  • Renault & Volvo Trucks Bridge
  • Renault Trucks HD
  • Volvo Trucks HD
  • UD Trucks HD
When the calibration has been completed and the progress bar has reached 100%, the operation does not proceed to the result view.
The calibration works, but it is not possible to display the result view. Work around
When the calibration is done;
  1. In Tech Tool: Verify that there is a green check tick for the
  2. In Tech Tool: Verify that progress bar has reached 100%.
  3. In Instrument Cluster: Verify that the driver assistant system is now available again in the instrument
  4. In Tech Tool: Click
  5. In the truck: Do Key Off, Key On
Volvo tech tool tech support:

6 décembre 2018

Cummins INSITE 8.2 Download Free Version & Tested Version

Classé dans : truck diagnostic tool — carsets @ 8 h 38 min
Free download Cummins INSITE 8.2 with installation and activation help to make it work with new and old inline 4/5/6/7 adapters. Here are two versions for you, one with free activation for 15-day trials only, the other with 500 times to use once activated.
Part 1: Insite 8.2 FREE version:
Here is the Cummins INSITE 8.2.X installer that tests all levels of functionality
Members copy patch files to C/Intelect/INSITE/XMLData folder and shortcut to desktop
Copy code gives me free activation 15 trials.
UNKNOWN SECURITY! You’re trying the free insite at your own risk!
Iniste 8.2 download:!C4AXSLhQ!_PhBWk0d52x0mX33GXrm3Q
Key via ping1226 at
Cummins INSITE 8.2+Full KG PRO top, fleet calibration and flash ecm feature list
1. Authorization file generator
2. Username generated authorization file
3. Is it bound to a computer (Cancel is not limited to computers)
4. Lock the CPU to lock the serial number of the hard disk
5. Bind the MAC Address to the BIOS Information
6. Check the limit and enter the appropriate value. Unchecked is no limit.
7. Valid expiration time
8. Limit once per minute
9. Limits can run for a total of minutes
10. Limit attempts to limit trial dates
Part 2: Insite 8.2 TESTED version:
Here is the 100% tested version. You can use the Insite 8.2 pro or lite version with security and relief. You have 500 times for use once your insite is activated.
Insite 8.2 free download:
Insite 8.2 remote installation & activation service:
Insite 8.2 pro:
Insite 8.2 lite:
A good tip: Iniste pro vs Insite lite
Insite 8.2 installation help:
You will have luck with Windows 7/8/10. But on Windows 10, pls run as administrator
Insite 8.2 and Inline 4/5/6/7 adapters:
Inline 5: no longer produced
Inline 5:
Inline 6:
Inline 7:
Do not substitute cables, except as indicated in the INLINE 5, 6, or 7 Product Announcement Bulletin.
Incompatible cables may damage the INLINE 5, 6, or 7 adapter or personal computer and will void warranty.
Incompatible cables may cause communication issues with INSITE.
INLINE 5, 6, and 7 adapters may intermittently lose communication. If your Datalink adapter has communication problems, disconnect power from the adapter for 5 seconds and then reconnect. The INSITE program does not need to be shutdown.
There is a feature under Tools > Reset Datalink Adapter that may correct some software communication errors with the INLINE 5, 6, and 7.
The main harness (backbone) has a maximum overall length of 40 meters.
A J1939 stub, which can be a connection point for ECM’s and/or the INLINE 5, 6, and 7 Datalink adapter, cannot exceed a maximum length of 1 meter.
At each end of the backbone harness is a terminating resistor with a nominal resistance of 120 Ohms, it will measure 60 Ohms when you measure across the Datalink.
The INLINE 5, 6, and 7 adapters should be connected to a continuous battery power supply. When making adjustments with INSITE, including calibration download, the operator will be asked to switch the key off. If the adapter is getting its power from a power source dependent on the key switch status, such as the lighter adapter inside the cab, the adapter will lose power, which will result in INSITE losing connection to the ECM. This will require the operator to reconnect to the ECM and the adjustments might not have been saved.
Insite 8.2 protocols:
Engine Model Years 2007 and newer only support the J1939 protocol. Please refer to the following table for specific information:
Note: The INLINE 4 adapter is obsolete. It can be used with INSITE, but technical support for this adapter is no longer available.
INSITE 8.2.0 released notes:
1  Opening INSITE
  1. Installation
  2. Connections
  3. Advanced ECM Data
  1. Display Graphics
  2. ECM Diagnostic Tests
  3. Fault Codes
  4. Printing
  5. Simulators
  6. INSITE Integrated Simulator – Single and Multi-Module
  7. Work Orders/ECM Images/Templates
In detail…
1 Opening INSITE
INSITE 8.2.0 takes longer to open if the computer has been restarted. Issue is currently under investigation.
2 Installation
INSITE 8.2.0 does not support Windows® XP or Windows® Vista. INSITE version 8.2.0 will only operate on PC’s running either Windows® 7, Windows® 8 or Windows® 10.
Refer to the table below for the hard drive space required for the installation of
INSITE 8.2.0. This is based on the assumption that the Operating System is installed
on C:\
Hard Drive Space Requirements
– Upgrade from 8.1.3: 350MB
– Fresh Install: 500MB
NOTE: It is highly recommended that you always reboot your PC after installing software
3 Connections
Error Messages for communication failures:
Error 5200: Indicates communication loss between computer and the datalink adapter.
Error 5201: Indicates communication loss between the datalink adapter and the ECM.
Error 5202: Indicates no communication could be established between the datalink adapter and the computer.
Error 5204: Indicates no communication could be established between the datalink adapter and the ECM.
If the “Auto Configure” and/or “Datalink Adapter Connection Test” do not find the adapter when connected, manually configure the Datalink adapter connection.
An Internet connection is required before selecting the following URL’s from the Help > About INSITE menu: or
4 Advanced ECM Data
If the display becomes distorted or cannot be completely viewed, close the Advanced ECM Data window and then reopen it. Resizing the window can cause the view to become distorted.
5 Calibrations
Automotive applications will have a default setting of “ON” for the Save and Restore option in the Calibration Download dialog.
Industrial applications will have a Default Setting of “OFF” for the Save and Restore option in the Calibration Download dialog.
When performing a Calibration Download, the “Save and Restore” option may be grayed out for some applications.
To decrease calibration download times, please insure that all applications other than INSITE are closed. Always use the J1939 protocol and engine connector when available.
Computers with less than the minimum recommended hardware requirements will have an extended Calibration Download time. Screen savers and suspend modes should be disabled
6 Display Graphics
The use of Large Toolbar Buttons will not display all icons on the toolbar. Work Around: Under Tools > Options > General, select Small Buttons in Display Options.
Dual Monitors are not supported by INSITE.
To disable the “Display Feature Names” option for the view bar, uncheck the box in Tools > Options > General > Viewbar > Display Feature Names.
If your PC monitor display is set to “Large Fonts”, some information in INSITE may not be displayed. It is recommended to use small fonts.
7 ECM Diagnostic Tests
If the display becomes distorted or cannot be completely viewed, close the ECM Diagnostic Tests window and then reopen it. Resizing the window can cause the view to become distorted.
8 Fault Codes
The MIL Lamp Status is not displayed when printing the Image Fault Codes in Tool Display Format.
Work Around: Print the Image Fault Codes in Text Only Format or connect to the image, open Fault Codes and select the Print icon.
9 Printing
When using print preview, use the tool bar magnifying glass to display the text in a larger view. The Print options will be disabled when no printers are available. This includes the Page Setup, Print and Print Preview options. Work around: Setup/install a printer on the PC and retry the INSITE print selection.
10 Simulators
Values shown in simulator do not reflect real values that would be seen when connected to an engine.
11 INSITE Integrated Simulator – Single and Multi-Module
All simulators for the 2007 models and above were combined into one single simulator called INSITE Integrated Simulator – Single Module and INSITE Integrated Simulator – Multi-Module. These will display all the Features and Parameters, ECM Diagnostic Tests, and Advanced ECM Data that is supported for single and multimodule engines.
12 Work Orders/ECM Images/Templates
Double clicking on the exported image files (.csv format) will not open them with the correct format in Microsoft Excel. Work around: Follow the steps below to open an exported (.csv format) image file in Excel:
  1. Open the .csv image file with Microsoft Excel
  2. Highlight column A
  3. Click on Data > Text to Columns
  4. In Step 1 of the wizard, make sure the “Delimited” option is selected and click “Next”
  5. In step 2 of the wizard, uncheck the “Tab” box and check the “Comma” box and click “Next”
  6. In step 3 of the wizard, click on “Finish”
  7. Format columns as desired.
When upgrading to INSITE 8.2.0, the following file and folder need to be backed up:
Alternatively, select the “Export All” from the right-click menu while highlighting any Image.
When using templates, it is recommended to verify the first template sent to the target vehicle. This helps ensure the template configuration is correct for subsequent vehicles.
When using templates, verify that the ECM code is compatible or the same.
When naming images and templates, special characters cannot be used (i.e. & ^, etc.).
Insite 8.2 images:









5 novembre 2018

Cummins INSITE 8.3 Software Download and Install

Classé dans : truck diagnostic tool — carsets @ 9 h 57 min
Here is the Cummins insite 8.3 that been going around with the KG. All here is for the purpose of education and help.
Insite 8.3 download links: Link 1: Insite 8.3 Pro with Kg!sDhQSCRB!0btEo9cTFQ4315O6zxWjpw
Link 2:
Link 3:
(Free)Link 4: (100% tested with Inline 7)
Youtube video: Insite 8.3 Install
Cummins Insite 8.3 installation instruction:
Read the all the instructions and your clue is at the end. Please don’t ask me for the password for the zip files
1 install Cummins Insite 8.3
2 Rename primary Insite icon ” DOWNLOAD ICAL files only ”
3 Copy the Instie crack program to Desk and double click open it
4 Copy hwid from activator to keygen with
5 Put any user name you want
6 generate key place key and name in activator
7 run activator as admin
8 start icon should open up
9 hit start insite logo should show
10 when the activate licence window opens up click simulator mode
11 make sure internet is on for first activation
12 other time activate licence window open click simulator it will still work correct no active licence ever show but it will work like dealer lisenced pro.   Password to open main zip file MmhaUuto!$theSh!t Password to open second zip ThankYouGhostman!!
Insite 8.3 Question and Answers: 
Q: Insite 8 installation was done perfectly without issue. But when trying to connect any ECU – Insite asks about license for connecting.
A: Don’t use original icon. Use loader and run as admin.
Q: This is version 8.3. error 50005
A: Uninstall everything including folder in c drive reinstall connect to internet the first timehit simulator and run as admin might even have to make exemption in antivirus. It works well but if you are running windows defender it can cause some communication issues I have found. For the best solution but not free solution contact zdssf
Q: I could install perfectly here, but I have a problem. When I do the download of calibration files they are found on the net, I click save but they do not save anywhere on the computer. Has anyone ever experienced this?
A: All the calibrations can be downloaded from:…ools/incal
Save them to the cal workspace folder and you have them all to rummage through as you need.
I have always found this to be much easier.
Q: works with nexiq usblink interface?
A: Yes. I run it with genuine nexiq 2 or inline 6 data link adapters.
Q: How to obtain the registration name for the keygen
A: Just put anything in there like you name. i just use my computer id. same as middle box. i know the video is clear as mud.
watch it a few times and that is all it does. this works good when you are done. when it launches insite
use the the bottom button. once in simulator mode pick your data link.and connect. just like a licensed copy.
Cummins insite 8.3 reviews:
– Very good work
– mine is still working and it’s been almost 2 months
– been playing around with this.
seems to work ok. flashed a truck with it today with no problems
– If people can follow directions for activation it will work fine for them you can upgrade the fis with 8.4 and have a pretty a solid program it was a good share. For many people here because 7.6 was going by way of the dinosaur. Now the members here have a way to work on the new stuff.
Insite 8.3 tech support:

20 septembre 2018

Caterpillar CAT ET 2018A Installation and Activation

Classé dans : truck diagnostic tool — carsets @ 9 h 54 min

2018A Caterpillar Electronic Technician is the latest CAT ET software to work with CAT/CAT3 truck adapter.


What’s new in 2018A?
Trainer Update-998K XE Wheel Loader.

Multi-language: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish

Operating system: Windows 7 32 bit, Wnidows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit

Activation: One Time Free Activation online


Note: If you need to enable CAT3 scanner WiFi connection, you should use older version CAT ET 2015 software. The 2017A, 2018A CAT ET software will not connect to WiFi.


The CAT ET 2018A and CAT3 are sold offline. If you are interested, please contact

Whatsapp : +86 18259252285


How to install CAT ET 2018A software?

Step 1: Install CAT ET 2018A setup

Copy all files in software CD to desktop

Read ReadMe txt instruction before installing

Open Cat ET 2018 v1.0.exe setup
Select setup language
Install Cat Electronic Technician 2018A v1.0 installSheild Wizard
Press Next
Accept license agreement
Installation completed will generate CAT ET 2018A software on desktop

If system prompt to install WinPcap, press Yes

Install WinPcap 4.1.3 setup wizard
Press Next
Accept license agreement

Tick Auto start the WinPcap driver at boot time and press Install;
Install WinPcap setup finished

Cat Electronic Technician 2018A v1.0 InstallSheild Wizard installation completed

Windows will launch Browser, accept security warning


Step 2: Activate CAT ET 2018A

When the installation completed successfully,
Open 2018a_Files folder->Comet->copy and replace Comet.exe and CometDll.dll in the installed directory
(32bit operating system) C:/program Files/Commom Files/Offboard Information Products/2018A/Comet
(64bit operating system) C:/program Files (x86)/Commom Files/Offboard Information Products/2018A/Comet



Copy and replace CometDll.dll and FlashServer.dll in the installed directory
(32bit operating system) C:/program Files/Commom Files/Offboard Information Products/2018A/Flash
(64bit operating system) C:/program Files (x86)/Commom Files/Offboard Information Products/2018A/Flash



Copy FlexLM folder in 2018a_Files folder to Disk C:

Go to My Computer properties->Advanced system settings->Environment variables,
check that following

Value: C:/FlexLM/License.dat


If the above environment is not available, click new and create


Open getid
Send the HWID to us, we’ll send back activation key

Create a notepad and paste your activation key on desktop
Put the activation key to the directory:
(32bit operating system) C:/program Files/Commom Files/Offboard Information Products/2018A/Comet
(64bit operating system) C:/program Files (x86)/Commom Files/Offboard Information Products/2018A/Comet


Put the activation key to the directory:
(32bit operating system) C:/program Files/Commom Files/Offboard Information Products/2018A/Flash
(64bit operating system) C:/program Files (x86)/Commom Files/Offboard Information Products/2018A/Flash


Delete all files on desktop (except CAT ET 2018A software)
Run CAT ET 2018A software




6 février 2018

John Deere SA Search Engine not loaded Error Solutions

Classé dans : truck diagnostic tool — carsets @ 8 h 47 min

This is for anyone when he/she runs the John Deere Service Advisor heavy duty diagnostic software, the system appears error message that the search engine module can not be loaded and then the program ends.




Optional solutions:


Solution 1:


Run as system administrator, roll back pc date reactivate using activator Then roll date back to normal date if error still renew once again. Been working for me so far.


Note that, don’t know how long it stay working but works im sure someone will have solution for it soon.

Also advice if doing fresh install roll back the date on pc do the install after then install and activations have been done.
Go to task manager look for the service adviser on have it start its tasks in 2030 :save and then reset your pc date should be good for while



Solution 2:


if you set a date before the lightweightidol license expired, start the lightweightidol service, set the real date and start Advisor, it works.



Solution 3:


start advisor. when error comes with “search engine” Close John Deere SA. afterwards set your PC date to feburary 2015. start SA again (run as administrator). it now comes with error on licence. close SA Again. set pc date back to normal. run SA Again. now it Works.



Solution 4:


The search engine error can be solved.
Set back the date, before the expiry date found in Service ADVISOR\SUIR\license.log (august 14 in my case). Start LightweightIDOL service. Set the real date, and Advisor working again.
I made a batch file to simplify it. To make it work Control Panel/Regional/short date format have to be yyyy-mm-dd or you have to modify batch. Maybe you have to modify ServiceADVISOR.exe path too in the batch. Have to run as administrator.





Solution 5:


I have had the same error with ssearch engine connection in JD SA.
reinstalled it twice, changed system date back and forward, run activator. No result for me.

But actually I found the solution for this issue.
Just need to install july update from the post…#pid758969
And the error disappeared.


newer data discs (2016/02)



Solution 6:


back date to 08.10.16
install JD SA, restart, activate, mount latest disk you have (05.2016) and install update, for finish get license error, ignore and close, set actualy date, run JD SA -> works fine, install july update

testing today on 3 laptops (Windows 7 and 10)



On a side note: procedure about turning off the updates


don’t know how long it stay working but works im sure someone will have solution for it soon.

Also advice if doing fresh install roll back the date on pc do the install after then install and activations have been done.
goto task manager look for the service adviser on have it start its tasks in 2030 :save and then reset your pc date should be good for while Smile (SO TURN IT OFF IN TASKMANAGER SO IT STARTS 20 30 YEARS FROM NOW!!)


Fresh new installations also work but can be much more complicated sure a patch would be much easier. But it can be done with out a patch so far



In taskmanager I don’t stop any service just put service advisor updater to 2030 to start

also makes sure eculp.ini configurator reads like this

A valid ECULP License has been found

Licenses for the following modes have been found:
TestCell Programming
FinalEOL Programming
Service Programming
ECUCPP Programming Tool

All JD Components were found and properly licensed

JDEcu : Version 1.0 : 01-apr-2021
JDConfig : Version 1.0 : 01-apr-2021
JDData : Version 1.0 : 01-apr-2021
JDIntelHex : Version 1.0 : 01-apr-2021
JDPayloadReader : Version 1.0 : 01-apr-2021
JDPayloadProcessor : Version 1.0 : 01-apr-2021
ECULoaderProgram : Version 1.0 : 01-apr-2021
ECULP_TestCell : Version 1.0 : 01-apr-2021
ECULP_FinalEOL : Version 1.0 : 01-apr-2021
ECULP_Service : Version 1.0 : 01-apr-2021
ECULP_TestCell_OEM : Version 1.0 : 01-apr-2021
ECULP_FinalEOL_OEM : Version 1.0 : 01-apr-2021
ECULP_Service_OEM : Version 1.0 : 01-apr-2021
ECULP_ECUCPP : Version 1.0 : 01-apr-2021
ECULP_Direct_EOL_Output : Version 1.0 : 01-apr-2021
ECULP_OEM_DISTRIBUTOR : Version 1.0 : 01-apr-2021
Service_ADVISOR_Ag : Version 1.0 : 01-apr-2021
Service_ADVISOR_CF : Version 1.0 : 01-apr-2021


The last – if all tips/solutions above don’t work for you,

John Deere Service Advisor 4.0 Crack – No Search Engine Error

Look here:

28 décembre 2017

Scania SDP3 2.31.1 for VCI2 VCI3 Download and Install

Classé dans : truck diagnostic tool — carsets @ 10 h 11 min
Scania SDP3 2.23.1 truck diagnostic and programming software crack for VDI2 VCI3 free download and installation on Windows 7 64-bit system step-by-step. No USB dongle, without activation.
Software Version: V2.31.1
Operating System: Windows 7 64 bit
Software language: German, English,Spanish, Finnish, French, Italian,Japanese, Korean, Dutch, Polish, Arabic, Portuguese, Russian, Swedish,Turkish, Chinese, Traditional Chinese,Romanian
Compatible device: Scania VCI2Scania VCI3 truck diagnostic tools.
Free Download Scania SDP3 2.31.1 Software 
If you need newer SDP3 2.33, please check here

How to install Scania SDP3 2.31 software?

Please set date/time to March, 2017 (i.e 27/03/2017) on Windows 7 64-bit PC/computer.
Step 1: Install Adobe Reader
Open SDP3 2.31 software CD
Open AdbeRdr920_en_US
Install Adobe Reader 9.2
Click Next
Click Install
Adobe Reader setup completed. Click on Finish
Step 2: Install Microsoft.NET 2015
Open NDP462-KB3151800-x86-x64-AIIOS-ENU and install Microsoft.NET 2015
Accept license terms. Click on Install
Installation is complete.
Click on Finish
Step 3: Install Scania SDP3 2.31 Setup
Open Scania Daignosis & Programmer 3 2.31 setup
Install Scania SDP3 2.31 setup
Click on Next
Accept license agreement
Choose destination folder C:/Program Files (x86)/Scania/SDP3
Click Install
Make sure that the VCI unit and the SDP3 USB key are disconnected from the computer before continuing with this installation.
Complete the SDP3 2.31 setup.
Click on Finish
Step 4: Turn off User Account Control
First copy sdp3 patch 2.31 folder from software CD to desktop
Right click the mouse->Personalize->Control Panel->User Accounts and Family Safety-> User Accounts->Change User Account settings
Select Never notify and press OK
Open sdp3 patch 2.31 folder on desktop
Run tmode as Administrator
Restart computer to turn off User Account Control
Step 5: Install SDP3 driver
Open patch folder
Open drivers folder
Run install_divers as Administrator
Run install as Administrator
Select Install this driver software
Driver installed successfully.
Step 6: Run SDP3 & Change Language 
Open patch folder->FIX SDP3 2.31 folder
copy these 2 files SCOMM_SSK.dat and SCOMM_SSK_HL.dll and replace them on C:/Program Files (x86)/Scania/SDP3
Open SDP3 software on desktop
Accept warning and Adobe Reader licences agreement
Select Connection tab-> Connect to wireless VCI
Exit SDP3
Open SDP3 Configurator
Select language
Then run Scania SDP3 software again, language is set to you desired.

19 décembre 2017

Free Download Scania SDP3 2.33 Without Dongle

Classé dans : truck diagnostic tool — carsets @ 10 h 05 min

Scania Diagnos & Programmer 3 (SDP3) new software version 2.33 adds more Scania trucks and updated database.


Software version: 2.33
Support Languages: English, German, Spanish, French, Japanese, Dutch, Persian, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese.


Released date: Dec. 7th, 2017
Version: 2.33
Security: verify working 100%
O.S. requirement: Windows 7 32 bit, Windows 8/8.1 32 bit, Windows 10 32 bit

Need Netframework 4.5 installed on system. windows 7 or 8 will be better.
In order to install SDP3, administrator rights are required.
Note: The USB key and VCI must not be connected to the computer during the installation of SDP3, especially  if SDP3  is not installed for the first time.

Scania SDP3 communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication. The program is used for troubleshooting, adjusting customer parameters, calibrations, conversions affecting the electrical system and updating software in control units.


Free Download Scania SDP3 V2.33 (2018) software!57xTAaoB!DVwFWXE5Y6EibBcCweVw9htHhGxfP-5Vuy6jpYOXM9M

password: scania2018



How to activate Scania SDP3 2.33 without dongle?

79.99USD for the software including one time free activation service via Teamviwer.



Tested version– Scania SDP3 V2.33

You can install the latest Sops and XCOM.

Verified to work with Scania VCI2: can support vehicles after the year 1995:
Scania P, G, R, T, buses Scania series K, N, and other vehicles using engines Scania


Verified to work with Scania VCI3: support vehicles after the year 2004:
trucks, buses and other heavy vehicles, which produces the corporation Scania
In short, Only hardware difference, they can use the same software


The catalog “Scania SDP2 2.33 Diagnostic Software” is the dealer software , contains all needed detailed infomation , which depends on type of the catalog (spare parts catalog, repair service manuals / bulletins, workshop or shop manuals, body repair manuals, wiring / electrical diagrams, hydraulic lines, customer or operation manuals, diagnostic program, technical information and other documents)


Highest level access
Internal Scania
Industry & Marine
Authorized Scania Workshops


Check and adjustments
Fault Codes
Fault Reporting
Programming of Control units

7 novembre 2017

Step by Step to Install Cummins Insite 8.1 on Windows 10

Classé dans : truck diagnostic tool — carsets @ 8 h 20 min

Topix: How to install Cummins insite heady duty diagnostic software on Windows 10 step-by-step.

Cummins insite crack download:
cummins insite LITE 8.1
cummins insite PRO 8.1
Both tested OK and works no issues on Windows 7, Windows 8, Windows 10
Cummins insite 8.1 Win 10 installation:
load into the virtual drive
install insite8.0
installing insite…
select a language: English(united states)/Chinese(simplified)/Danish/Dutch/Finnish/French/German/Italian/Japanese/Korean/Norwegian/Portuguese/Russian/Spanish/Swedish/Turkish
go on installing insite…
accept the license agreement
insite 8.0 complete install
update manager language option
update manager installation complete
open update manager for the newest version
select update from cd dvd
select refresh updates
select install updates
insite 8.1 installation will be successful
Cummins insite 8.1 installation successful
accept the terms of the license agreement
select simulator-mode
add Cummins inline 6 adapter and find no driver
Install inline6 driver from cd-rom
find inline 6 driver
after install  inline6 driver you can add new rp1210 device
after sw installation successfully, add driver you can diagnose and reflash
Job’s done. Insite 8.1 is ready for use.
So, does anyone have experience of running Cummins insite software on Windows 10? I’ve seen mixed response about compatibility and I wanted to see if anyone here has done it with success.
Here you go
Cummins Insite Windows 10 Reviews:
See lots of people negative on this issue but I been running my on Windows 10 for a while now with no issues using plug under dash. Now I do keep my noise signal low by disconnecting inverter from battery. Turning off all unnecessary items like radio and cruise control. Have no problems uploading or downloading cal files.
Be mindful, unlike others on this board, I am not a power user just occasionally.
it runs fine on windows 10. its not my first choice but if thats what you have its fine.
I have had it work on win10 home too but it quit working. I reformatted my drive tried to install insight and it says something is interrupting install. I am trying it on win10 pro.
I installed 7.6.0 and it worked fine, I then copied my entire Intelect folder from another computer that is running XP withinsite 7.6.2 to a flash drive and from the flash drive I moved the intelect folder to the computer that I am using windows 8.1 on. It worked fine for me after unlocking and applying the SP5 patch. I did the same to a computer using windows 10 with no issues.
I install version 7.6 of insite in Windows 10 without any problem, the following maner before giving double click the setup, then you give right- click and select properties select compatibility compatibility mode to win xp sevice pack 2 and ready the program began to install only have patience .
I’m running Ubuntu 15.10 with VirtualBox, and Win XP VM. INSITE works perfectly, and not one problem with the install. I have done it multiple times. Try running a VM with an older version of Windows. Just my two cents.
I have install all Insite, Jpro, DDDL, on win 8.1 then updated to win 10 all work fine on issue.
i got mine to work but had to set it as admin and run as windows 7.
Professional working for here recommend
Windows 7 32bit is the best solution of Cummins INSITE install.
Anything beyond Windows 7 is crap. I am sooo done with MS and 3 or 4 service packs just to get it to work right. It just never lives up to the promise.
If you have an cm871, 7.5 is all you need to run.
If you have a 2250-2350, yeah you should to be running Insite 7.6
Win 10 spies on loaded software anyway.
If you haven’t had the pleasure of running Linux, try it. Ubuntu or Lubuntu. FREE!
You can run duel boot on the same hard disc and load win 7 in a virtual machine.
Never had any problem running Insite.
Windows actually runs better in a VM on Linux. Very light on hardware resources.
My point is, don’t let the hardware dictate, there are options.
I can see his futurte,.. he manages to put Insite on his “gaming” windows 10 machine,.. then comes on the forun=m in a couple months complaining his ECM is dead — because it got a virus!.

7 septembre 2017

Free Download Scania VCI2 SDP3 V2.23.1 Truck Software

Classé dans : truck diagnostic tool — carsets @ 9 h 52 min

Scania SDP3 VCI2 heavy duty diagnostic tool software update to latest V2.23.1.


Free Download Scania SDP3 2.23.1 Software


Scania SDP3 v2.23.1 Diagnosis & Programmer [2017]
Diagnostic & Programmer software for Scania trucks .
Region: All regions

Version: v2.23.1
Type: Diagnostic & Programmer Software
O/S: Windows 7 32 bit,  Windows 8/8.1 32 bit, Windows 10 32 bit.
Software language: German, English,Spanish, Finnish, French, Italian,Japanese, Korean, Dutch, Polish, Arabic, Portuguese, Russian, Swedish,Turkish, Chinese, Traditional Chinese,Romanian
Quantity of CD: 1 CD
Year: 2017

SDP3 2.23.1 Diagnostic & Programmer software works with Scania VCI2 interface
Highest level access
Internal Scania
Industry & Marine
Authorized Scania Workshops

Scania SDP3  v2.23.1 Features:
* Check and adjustements
* Conversion
* Maintenance
* Campaign
* Bodywork
* Fault Codes
* Fault Reporting
* Programming of Control units

Scania SDP3 latest version 2.31.1 is released on 09/07/2017:


Scania SDP3 2.31 test report:


Scania SDP3 2.31.1 system requirements:

Windows 7 32 bit,  Windows 8/8.1 32 bit, Windows 10 32 bit.


  • Microsoft .Net Framework 4.6.2 must be installed.
    • There is no longer support for Windows 7 32 bit. For more information, see Ti 00-17 01 25.

Scania SDP3 2.31.1 features:
Function view
By using the search box at the top of the window you can now search directly in the function view. You can choose to search in the Adjustment, Check or Calibration tab.

The procedure for defect reporting in SDP3 has been improved to make it simpler to follow.
Instead of a guide in several steps, there is now a simple dialogue box. In the dialogue box you can select if you want to save the defect report locally or if you want to send it via e-mail. To be able to send the defect report via e-mail you must have Microsoft Outlook. You can choose to create a defect report for a specific individual product or to make a general defect report.
The dialogue box for defect reports you find in the Help menu.

Note: As from SDP3 2.31, the dialogue box is no longer available for use if you are connected to a job type.  Scania CV AB 2017
Communication troubleshooting
• The  instructions& solution for communication errors has been updated. You access the document via the Help menu.
System specifications

CUI –Infotainment system
• Support resume an interrupted download of software has been introduced.

COO – Coordinator
• The new guide verify and check switch modules in the steering wheel according to the version and the vehicle’s SOPS file.
EMS – Engine Management System
• Vehicles with the S8 engine control unit have previously lacked support for Default setting of power take-off adaptation. This has now been rectified.
• The Spark check guide has been removed for vehicles of the P, G, R and S series with Euro 6 gas engine. As the support in SDP3 has been improved, the guide tool is no longer required. Instead, use the Electrical system view for troubleshooting.

RES – Rechargeable energy storage system
• For the sake of clarity and uniformity, the hybrid battery has been changed to propulsion battery in all instances in SDP3.

TMS – Transmission management system
• New parameters have be added to TMS2:
o Clutch monitoring
o Downhill speed control with active prediction
o Reduced use of the clutch (new values)  Scania CV AB 2017
• After a product update of the transmission management system, the Accelerometer adaptation must always be run. It now starts automatically after an update of the control unit.

GMS – Gearbox management system
• A  function guide which shows how the power is transferred in the gearbox for different gears in real time has been added. You can also see how the gear shift forks move and which sleeves are affected.
The guide applies to the following gearboxes:
o GRS905
o GRS905R
o GRSO905
o GRSO905R
o GRSO925
o GRSO925R
o GRSO935
o GRSO936R
The guide also applies to the following transmission management systems:
o OPC4,
o OPC5
o TMS1
o TMS2

CMS – Chassis management system
• A guide for bleeding control circuit 2 has been implemented.
• Circuits, I/Os and the functional description of differential locks has been improved.

TSS/TSA – Tag axle steering system
• Function guides for activating and deactivating service mode have been implemented.  Scania CV AB 2017
• A function guide for checking EST and ESTA has been implemented.
• A new parameter for the centring function has been implemented.



Scania SDP3 2.31.1 car list:

To work with Scania VCI2: can support vehicles after the year 1995:

Scania P, G, R, T, buses Scania series K, N, and other vehicles using engines Scania
To work with Scania VCI3: support vehicles after the year 2004:

trucks, buses and other heavy vehicles, which produces the corporation Scania

In short, Only hardware difference, they can use the same software
Scania vci 3 diagnostic tool highlights its high-speed WI-FI connection


Gaskustoms |
Mon Deux-Roues |
Autopassion34 | | Créer un blog | Annuaire | Signaler un abus | Handlebar
| Noirmatpeinturecovering
| Coveringmatvoiture