Carsets

  • Accueil
  • > Archives pour janvier 2019

25 janvier 2019

Cheapest Way to Replace and Program Mercedes ME 9.7

Classé dans : ECU chip tuning tool — carsets @ 4 h 56 min
Question: How do you replace and program Mercedes ME 9.7? Possible to do it within 300 usd?
Answer: There are usually 3 optional ways. And the cheapest is 299 usd for all.
Optional solutions:
There are 3 solutions available if you have a ME 9.7 ECU damaged!
 Method ECU Programmer Adapter Cost
Expensive

(the dealership)
Original ME 9.7 ecu from the Mercedes dealership Original SD connect C4 for online programming No

10,000+ usd
Popular Functional ME 9.7 ecu on the web SD connect C4good china clone for online programming No 600 usd around
Cheapest Functional ME 9.7 ecu on the web Ktag china clone to read and write data Renew cable 299 usd
In detail…
  1. expensive, the way same as the dealership does!
You can buy the original ECU ME9.7 and SD connect C4 emulator from the dealership.
Replace it and do online programming with C4
  1. popular among Mercedes owners
It’s popular because SD connect c4 is TOP 1 Mercedes diagnostic and programming tool.
You can buy a decent ME 9.7 ECU on the web. (Refer to the tip below to get a good ECU)
Replace it and do online programming with C4
  1. cheapest and tested successfully
The cheapest way is: Ktag + decent ECU + ME 9.7 renew cable!
ktag-me-97-ecu-and-renew-cable-1
source: http://www.obdii365.com/wholesale/benz-me97-ecu-ecm-engine-computer-with-ktag-renew-cable.html
the full kit with the best price: 299 usd
tip: you can see a lot of ECUs for sale online, but pls do buy an ECU that confirms to work good. here’s the functional ME9.7 tested by many Mercedes owners successfully:
new-benz-me-97-ecu-1

 

new-benz-me-97-ecu-2

 

new-benz-me-97-ecu-3
source: http://www.obdii365.com/wholesale/benz-me-9-7-ecu-ecm-engine-computer.html
the ecu can be used for any Mercedes equipped with ME 9.7:
Series Models Chassis NO Engine Model(ME9.7)
C Series C230 203.052 272.920
C Series C280 203.054 272.940
C Series C280 204.054 272.947
E Series E350 211.056 272.964
E Series E280 211.054 272.943
E Series E300 12.054 272.952
E Series E350 207.356 272.961
CLK cars CLK280 209.354 272.940
CLK cars CLK350 209.356 272.960
CLS sports cars CLS350 219.356 272.964
CLS sports cars CLS300 219.354 272.943
SLK sports cars SLK280 171.454 272.942
SLK sports cars SLK350 171.456 272.963
S Series S350 221.56 272.965
S Series S4100 221.195 272.974
M Series ML350 164.186 272.967
M Series ML300 164.182 272.945
R Series R350 251.165 272.967
R Series R300 251.154 272.945
GLK cars GLK300 204.981 272.984
GLK cars GLK350 204.987 272.971
The cheapest way:
When you get the original ECU data, just use this renew cable to connect to Ktag to write to Mercedes ME9.7 ME 9.7 ECU.  With this cable, you won’t need to open the ECU to write data anymore.
You need:
Ktag/KTM100 (to help write data)
Mercedes ME 9.7 ECU (for replacement)
Renew cable (to write data into the new ECU)
ktag-benz-me-97-ecu-renew-cable-connection-1

 

ktag-benz-me-97-ecu-renew-cable-connection-2
Note: The ME9.7 renew cable CANNOT be connected to original ME9.7 ECU computer. It is confirmed to work with Me 9.7 ecu from obdii365.com without issue.
How to replace and program Me 9.7 with Ktag:
Step 1: disassemble the ECU from car
Step 2: read and save original ECU data with Ktag programmer
ktag-read-write-me97-ecu-1

 

ktag-read-write-me97-ecu-2

 

ktag-read-write-me97-ecu-3

 

ktag-read-write-me97-ecu-4

 

ktag-read-write-me97-ecu-5

 

ktag-read-write-me97-ecu-6

 

ktag-read-write-me97-ecu-7

 

ktag-read-write-me97-ecu-8

 

ktag-read-write-me97-ecu-9

 

ktag-read-write-me97-ecu-10

 

ktag-read-write-me97-ecu-11

 

ktag-read-write-me97-ecu-12

 

ktag-read-write-me97-ecu-13

 

ktag-read-write-me97-ecu-14

 

ktag-read-write-me97-ecu-15

 

ktag-read-write-me97-ecu-16
Step 3: connect the new ECU and Ktag with the ME9.7 renew cable
Step 4: write the data into the new ECU with K-tag
ktag-read-write-me97-ecu-17

 

ktag-read-write-me97-ecu-18

 

ktag-read-write-me97-ecu-19
Done!
Important: Ktag – Which version?
There are many Ktag versions incl. the original and EU/China clones.
Here, it’s possible to have a good success if you have a decent China clone.
This is the latest Ktag (firmware 7.020 software 2.25, red pcb inside)that’s confirmed to work perfectly with Me9.7 read and write:
http://www.obdii365.com/wholesale/ktag-v7020-red-pcb-online-version.html
The test on W203 Me9.7:
Ktag 7.020 ksuite 2.25 can read and write ME 9.7 without issues!
299 usd make it.
http://blog.obdii365.com/2019/01/24/replace-and-program-mercedes-me-9-7-ecu-with-the-lowest-price/

15 janvier 2019

Free Download Volvo Visfed 0.3.2 and Activation

Classé dans : truck diagnostic tool — carsets @ 8 h 46 min

This is for those looking for working Volvo IS File ED Visfed software to work with Tech Tool for Volvo, Renault, Mack trucks reprogramming:

http://www.obdii365.com/wholesale/visfed-revolation-techtool-2019-apci.html
visfed-download
Volvo IS File ED – is a special software tool to decrypt, edit, encrypt ECU reload (also called intermediate storage) files for Volvo, Renault, Mack trucks. Tool is made to make all file rebuilding process as simple and easy as possible. It also allows to view ECU file and other information of part and sub part numbers, parameters, PID, PPID, SID, PSID, FMI. Checksum calculation possible of Intel HEX line and whole CSW file.
VISFED 0.3.2 requirement:
The VISFED 0.3.2 can be used with Volvo Tech Tool 2.5, 2.6 or newer versions
Tech Tool 2.6
http://www.obdii365.com/wholesale/volvo-renault-mack-ptt-developer-tool-plus-v22-acpi.html
Tech Tool 2.7
http://www.obdii365.com/wholesale/volvo-premium-tech-tool-20486-development-with-apci-update.html
volvo-ptt-27
If your Tech tool doesn’t come from obdii365.com, pls contact us and engineers will help check your PTT to confirm whether the Visfed is working for you or not.
If you don’t have Tech Tool yet, you can get the bundle (Tech Tool + Visfed) – it will help save a lot:
http://www.obdii365.com/wholesale/volvo-premium-tech-tool-and-visfed-decryptor.html
VISFED operating systems:
VISFED Windows 7: Confirmed!
VISFED Windows 10: Confirmed!
For other systems, you may have no luck to install.
VISFED laptop requirement:
visfed-laptop-requirement-1

 

visfed-laptop-requirement-2

 

visfed-laptop-requirement-3

 

VISFED 0.3.2 activation and installation:
Free service via obdii365.com
The professionals will help you activate and install Visfed to work perfectly
No installation issues!
Supported service:

• Adding langauge.

• ECU reload with original software.

• Remove SCR and increase HP on: Volvo trucks (D9B, D11C, D13A, D13B, D13C, D16C, D16E engines).

• Remove SCR and increase HP on: Renault trucks (D11A, D11B, D11C, DXi13A engines).

Diagnostic kit can worked with PTT and visfed:
Volvo Diagnostic Kit (vocom 88890300)
Renault Diagnostic Kit (88840133)
MACK Diagnostic Kit (RP1210)
UD Diagnostic Kit (RP1210)
Good to know:
Volvo tech tool vs Dev2tool vs Visfed:
http://blog.obdii365.com/2017/08/21/volvo-tech-tool-vs-dev2tool-vs-visfeed/
Visfed free version vs paid version:
you can get free Visfed when you buy Tech tool, but the function is limited.
Also, you may have luck to get a Visfed download link for free:
The paid version has powerful functions, including:
10000+ Flash files (Volvo Truck, UD, Penta, Volvo Ce, Mack, USTruck, Bus, Renault Truck) on Online Sever… and Updating Database

⦁ Get Orginal File From Volvo Server (Volvo Truck, UD, Penta, Volvo Ce,Mack,USTruck,Bus,Renault Truck)

⦁CONVERT ECU files – VOLVO FLASH FILES TO BIN FILES( FOR PROGRAMMERS  Kess& K-Tag) ORI/BIN To TMP/XML Techtool (PTT) Flash —SPECIAL OPTION !!!

Automaticly deactivate  ADBLUE off , EGR off, DPF off, NOX off on truck

AutomaticlyIncrase Horse Power

⦁Noxoff Files(Same Flash)

⦁Egroff Files (Same Flash)
⦁ SCR Files (Same Flash)
⦁ DPF Files (Same Flash)
⦁ Euro2 Files (Same Flash)
⦁ Euro3 Files (Same Flash)
⦁ Euro4 Files (Same Flash)
⦁ Euro5 Files (Same Flash)

⦁HpIncase Files

⦁Ecu’s Files for many ecu( Mid 128 ,140 ,130 etc)

⦁ See Flash Subdaset , Connected Vehicle Dataset and Compare Dataset.(Mid 128 ,Mid 140 See Language, Mid 130)

⦁Hextool (Whole Checksum, Linear Checksum ,ASCI>Hex,Hex>ASCI, File Linear Checsum)

⦁ Special Filter System On Online Flash ( Vehice specifications<brake,gearbox,aid,>,Hwid,MSW,DST1,DST2,CSW)

⦁ Auto Change Chassis ID on Hex (If whole checksum supported)

⦁Subdataset Editor (Only Change Subdatase Part no, and Name)

⦁ DST2,CSW Name Editor (Only ChangeDST2,CSW Part no, and Name)

⦁ Check Flash and Vehicle Parameter, and Parameter Count

⦁ XLM/TMP editor (Open own Xml and Tmp )

⦁ Auto Send all converted flash files directly in Techtool withoutmanual change chassis id or edited xml and interso.mdb….

And some interesting options:AdBlue/SCR/DPF/EGR/NOx Torque Reduction OFF.

Increase Horse Power.

Build Intel Hex file for chiptuning.

Recalculate Checksum of CSW.

VISFED 0.3.2 confirmed to work no issues:
ONLINE FLASH

visfed-032-download-1

 BINTOOLS BIN TO FLASH CONVERTING2

visfed-032-download-2

BINTOOLS BIN TO FLASH CONVERTING1

visfed-032-download-3

XML editor

visfed-032-download-4

Chassis Editor

visfed-032-download-5


 Volvo Truck flash files 8400
visfed-032-download-6


Automatically converting and put flash file in Tech tool
visfed-032-download-7

 

visfed-032-download-8
source: http://www.obdii365.com/wholesale/visfed-revolation-techtool-2019-apci.html
http://blog.obdii365.com/2019/01/15/volvo-visfed-0-3-2-download-activation-installation/

14 janvier 2019

How to Modify carprog to change mileage on Volvo 2000- 2010?

Classé dans : ECU chip tuning tool — carsets @ 8 h 02 min
Possible to use Carprog for Volvo dashboard emulator? Change km…
Yes. This is Carprog volvo S60 dashboard testing
carprog-volvo-change-km-1

 

carprog-volvo-change-km-2

 

carprog-volvo-change-km-3

 

carprog-volvo-change-km-4

 

carprog-volvo-change-km-5

 

carprog-volvo-change-km-6

 

carprog-volvo-change-km-7

 

carprog-volvo-change-km-8

 

carprog-volvo-change-km-9

 

carprog-volvo-change-km-10

 

carprog-volvo-change-km-11
Carprog and Volvo S60 details can be found at
http://blog.obdii365.com/2018/03/15/carprog-clone-and-volvo-s60-dashboard/
Thanks to obdii365.com
You need:
CarProg Volvo odometer correction software
Additional cables are required – A1+ (A1 PLUS) ODB2 adapter and A21 VOLVO CAN cable.  These cables are included in the full package:
http://www.obdii365.com/wholesale/carprog-full.html
How to use Carprog for Volvo dashboard:
With this software you can Read/Write dashboard EEPROM memory by OBDII CAN diagnostic, Read/Write dashboard processor flash by OBDII CAN diagnostic, repair odometer, reset oil service and erase error memory.
Works with these cars:
  • Volvo S80 1999-2000 with HC08 1H56A micro;
  • Volvo S60, V70, S80 2000-2001 with HC912 4F73K micro;
  • Volvo S60, V70, S80, XC70, XC90 2001-2004 with HC912 3K91D micro;
Volvo S40, V40, S50, S60, V70, S80 2004-2007 with 9S12 0L85D micro (now only by dashboard connector); Use cable C1 and A1+ (no need VOLVO OBD adapter).
carprog-volvo-0l85d-wiring-1

 

carprog-volvo-0l85d-wiring-2

 

carprog-volvo-0l85d-wiring-3
  • Volvo V50 2007+ with 9S12 3L16Y micro;
  • Volvo S60, V70, XC60, XC70, XC90 2007+ with 9S12 1K78X micro;
HINT:
after first programming phase start car engine twice and only after push “OK” on CarProg(CarProg ask just switch ignition ON-OFF)
carprog-volvo-test-1

 

carprog-volvo-test-2

 

carprog-volvo-test-3
Tutorial: How to build a C1 adapter for Volvo km change:
WARNING:  
If you use C1 together with A1MULTI – please cut OBDII male connector pins 3 and 11 like in picture:

A1MULTI adapter has 3 different CAN lines and this modification will disconnect CAN3-11 from CAN6-14 (look C1 schematic).
carprog-c1-cable-modification-1
Using this additional cable you can test car electronic on the table:
  • Volvo dashboard repairing on the table;
  • Airbag testing and “crash data erase” on-table;
  • Opel, VAG ECU programming on-table;
carprog-c1-cable-modification-2

 

carprog-c1-cable-modification-3

 

carprog-c1-cable-modification-4
Thanks to codecard.eu.
 
http://blog.obdii365.com/2019/01/14/volvo-2000-2010-obd-odometer-correction-with-carprog/

7 janvier 2019

Fgtech V54 Read and Write Renault Megane Sirius ECU

Classé dans : car key programmer — carsets @ 7 h 29 min

Fgtech galletto v54 new fw0475 master clone has been tested to read and write Renault Megane Siemens Sirius 32 ecu without issue.

Set up Fgtech v54 software

fgtech-0475-read-write-renault-sirius-1

Select  Car->Renault->Megane ->1.4/1.6/2.0 16V Sirius  32
Siemens Sirius 32 Renault K-line read and write

fgtech-0475-read-write-renault-sirius-2
fgtech-0475-read-write-renault-sirius-3

 

fgtech-0475-read-write-renault-sirius-4

Read ECU data

fgtech-0475-read-write-renault-sirius-5

Save ECU data

fgtech-0475-read-write-renault-sirius-6

Open ECU data just saved

fgtech-0475-read-write-renault-sirius-7

Writing ECU

fgtech-0475-read-write-renault-sirius-8

If fgtech 0475 prompts Checksum not supported, press YES to continue

fgtech-0475-read-write-renault-sirius-9

Writing ecu in progress

fgtech-0475-read-write-renault-sirius-10

Turn the dashboard off and back on. Then wait for
10 sec before continuing

fgtech-0475-read-write-renault-sirius-11

Fgtech V54 write Renault Sirius 32 ECU success

http://www.obdii365.com/producttags/fgtech-galletto.html

2 janvier 2019

OBDSTAR X300 DP PLUS Adds Hyundai Sonata 2018 Smart Key

Classé dans : car key programmer — carsets @ 10 h 26 min

How to: read pin code from 8A Smart card key and add a smart key on a Hyundai Sonata 2018 using OBDSTAR X300 DP PLUS.

obdstar-x300dp-plus-2018-hyunai-sonata-1

Original key and new key to be programmed

Procedure:
Connect X300 DP PLUS with vehicle via OBD socket
Select Diag Program->Hyundai->Hyundai v30.63->Read Pin Code->Read PinCode (8A Smart Card)

obdstar-x300dp-plus-2018-hyunai-sonata-2

 

obdstar-x300dp-plus-2018-hyunai-sonata-3
obdstar-x300dp-plus-2018-hyunai-sonata-4

Turn on ignition switch
Open and close the driver door
Reading data

obdstar-x300dp-plus-2018-hyunai-sonata-4

Read 6-digit Pin code success

Select Hyundai->Hyundai v30.63->Select from vehicle->Asia->China->New IX35->Smart Key System->Program smart key

obdstar-x300dp-plus-2018-hyunai-sonata-5

 

obdstar-x300dp-plus-2018-hyunai-sonata-6

 

obdstar-x300dp-plus-2018-hyunai-sonata-7

 

obdstar-x300dp-plus-2018-hyunai-sonata-8

 

obdstar-x300dp-plus-2018-hyunai-sonata-9

Press Start button and click on ENTER to continue
Turn ignition OFF

obdstar-x300dp-plus-2018-hyunai-sonata-10

OBDSTAR X300 DP plus will ask you enter pin code to continue
Enter PIN and confirm

obdstar-x300dp-plus-2018-hyunai-sonata-11

Put the original smart key vertically close to the Start button within 5s, and press Start button

obdstar-x300dp-plus-2018-hyunai-sonata-12

Program success. Follow same procedure to program a new smart key

obdstar-x300dp-plus-2018-hyunai-sonata-13

Both smart key programming success
Test the remote and start car.

obdstar-x300dp-plus-2018-hyunai-sonata-14

 

obdstar-x300dp-plus-2018-hyunai-sonata-15

Done.

http://www.obdii365.com

Gaskustoms |
Mon Deux-Roues |
Autopassion34 |
Unblog.fr | Créer un blog | Annuaire | Signaler un abus | Handlebar
| Noirmatpeinturecovering
| Coveringmatvoiture