24 août 2018

How to program Volvo S60 with Dice VIDA Software

Classé dans : car diagnostic tool — carsets @ 10 h 48 min
Success! You have good luck to program Volvo S60 the year 2002 using VOLVO VIDA software.
After replacement of a failed CEM (central electronics module) on a 2002 Volvo S60, the software needs to be downloaded to the vehicle. This is done through Volvo VIDA software:
You need to buy a subscription from Volvo to gain access to the software files that you need to download, and then reload to the new DIM.
You need to be online. When you get a subscription, you gain access to VIDA 2014D but you still need to purchase and download the specific software you are re-loading, in this case, the CEM. It is a very time consuming process, especially if this is the first time you are programming. Lots of reading in their site. Hope this helps.
Here you go. Numerous communication faults found…
…due to a failed CEM
After CEM replacement, software is downloaded to vehicle
Programming a new control module
Programming of codes in progress in central electronic module (CEM)
The keys are manually programmed to the vehicle during the download
The diagnostic trouble codes are erased in all systems
The software has been downloaded into the vehicle
Carry out a pre-delivery check before returning the car to the customer
Note: during certain download sequences, the clock in the car will stop. Check and adjust as needed.
Select OK to finish the download sequence and to close this tab
The software download is complete

23 août 2018

VXDIAG Porsche Piwis 3 diagnosis car list

Classé dans : car diagnostic tool — carsets @ 8 h 28 min
VXDIAG Porsche Piwis 3 V37.250.020 tips and guides for newbies:
Porsch Piwis 3 Software:
Piwis III V37.250.020 – confirmed to work no issues with Vxdiag Porsche
Diagnostic test: passed
Coding: passed
Programming: passed
Porsche Piwis 3 Overview:
Porsche Piwis 3 diagnostics, applications, tools and system.
VXDIAG Porsche Piwis 3 All Details:
– Porsche Piwis 3 diagnosis + car list
– Porsche Piwis 3 Engineering
– Porsche Piwis 3 wiring diagram
– Porsche Piwis 3 remote help
In detail…
Part 1: Porsche Piwis 3 Diagnostics:
Here, connect to the ECU and select “Manual model line selection”.
Porsche Piwis III car list:
works with Porsche 911, Boxster, Cayman, Cayenne, Panamera (971 & 970), Macan, 918 Spyder etc.
Take Panamera 971 (after 2017)
Note: compared with Piwis 2, Piwis 3 combine the programming and coding menu in one menu.
Control units for diagnostic tests
Select “Gateway” and continue.
– Extended identifications
– Fault memory
– Data stream
– Coding and programming
– Maintenance repairs
Part 2:Piwis 3 Engineer software
Go to System for Diagnostics configuration for 991,981, 918, 970, Cayenne from MY11, Macan
– Version information
– Mode options – E refers to Engineering
– Choose “E” for the engineering version
Note that, after you change the mode to “E” and want to enter to change to other mode you will be disallowed, you need to restart the software. This is another difference between the PIWIS tester III and II. The developer claims to make a normal mode and develop mode for switch as free as you like.
Part 3: Porsche Piwis III Wiring diagram
Go to Application to get Wiring diagram
Choose a model and read the wiring diagram.
For the model after the year 2017, you need Porsche PIWIS 3
You can use the mouse to move the wiring diagram as you like.
Part 4: Porsche Piwis 3 Team viewer
Porsche piwis 3 tech support from via Team Viewer

21 août 2018

Tips: Mongoose Pro GM II Diagnostic & Programming

Classé dans : car diagnostic tool — carsets @ 5 h 09 min
Here are a lot of questions and answers of Mangoose Pro GM II (the dealer or the copy), including software compatible (Tech2Win and GDS2), comparison with GM MDI & Tech 2 & Snap On Solus, diagnostic & programming & reprogramming issues….


I prefer Mangoose Pro II because of price...what do you think..will it work with my corsa d without problem? Or GM MDI better?
GM Mangoose PRO only for Opel/Vauxhall/GM with Tech2Win and GDS2.
Full coverage diagnostic and SPS programming
GM MDI can be use as a passthru for other software too
This is one of the difference
Both are good
I really just want to know what software and equipment I need to get me going with the GM Cars I actually have for diagnostics and programming.
GM Tech2 scanner or Tech2 software can used with gds2 or mvci, genuine is little high, but cheaper you can get from chine,
other is Mongoose Pro GM II, depend what exactly you want to do.
Is this Mangoose Pro GM 2 that is listed on Drew’s website?
Yes, this is the same as the Mongoose Pro GM2.
Can you buy the china clone of Mangoose GM2? If so, how much are they?
I bought mine for 70usd off
Will this interface perform diag. and programming on GM Global A vehicle (with SPS and GDS2)
Yes, the Mongoose Pro GM II will work with SPS, GDS2 and Tech2Win.
Is the MongoosePro GM II compatible with “Data Bus Diagnostic” Tool software?
Drew Tech has stated that as of early March 2015, the Mongoose Pro GM and the CarDAQ-M are both compatible with GM’s “Data Bus Diagnostic” Tool software.
When using Mangoose Pro GM II to SPS programming, does it program at the same speed as the GM MDI?
The MongoosePro appears to flash as quickly as the MDI.
The MongoosePro GM is definitely quicker than the Tech 2.
The MDI cost 4x more than the MongoosePro GM II but it is not 4x faster.
I have TIS2WEB, Tech2WIN, GDS2 & MDI. Is the MongoosePro GM II plug and play or does it needs to be configured?
The MangoosePro GM II is plug and play. Make sure to install the Tech2Win driver if you want to use the application.
Can this product be used as a replacement for mdi? Used for Tech2win and gds2?
MongoosePro GM II is compatible with Tech2win and GDS2 software for scan tool diagnostics, and it will flash GM-vehicles.
The MDI is a separate tool that is also compatible with Tech2win and GDS2.
Yes, the MongoosePro GM II is a replacement for the MDI.
Both tools do flashing.
Also, both tools require a subscription
Can you guide me the way to install Mangoose GM software?
First thing you need to do with this setup is access the Tech2Win driver settings.
Next trick I think is how to get security access.
In detail…
Can the MDI do more than Mongoose Pro GM II can?
I already have a Tech 2 and a GM subscription and I need to be able to do the newer GM’s. Is there any reason not to buy this instead of the MDI? Will I be missing anything?
The Mongoose Pro GM II ALMOST does everything the MDI does. Currently that is:
– Module reflashing with SPS
– Diagnostics with Tech2Win software
– Diagnostics with GDS2 software.
UPDATE: The GDS2 software package includes the data bus diagnostic tool. Using the data bus diagnostic tool, the MDI will allow you to see voltage levels on the data bus, the Mongoose will not. The Mongoose will run the data bus diagnostic tool, but only partially.
Bosch corporate provides no support for installation and use of the MDI with GM software.
Drew does.
This is the big price difference.
Which tool do you recommend performing “advanced functions” on GM VehiclesThe cars I have are a 2003 Monte Carlo SS, and a 2009 Cadillac STS.
In order to perform “advanced functions” on GM Vehicles you are going to need something that talks with all the computers on the GM Vehicle.
The ones that I know of that do this are:
1) GM Tech 2 (will handle everything including programming the computers “updating calibrations”) This tool is being phased out but it’s still supported until they can get the MDI fully operational. Either way this works Stand Alone without a Laptop/PC.
2) GM MDI (Some say there are limitations with some model years but others say it’s better since the updates) Of course using Tech2Win to mimic what the GM Tech 2 does) – This performs like a J2534 Programmer as a Pass Thru Device. DrewTech and companies like Ease Diagnostics make J2534 Pass Thru Devices that will do this as well. And they sell their own flavor of Diagnostics Scan Software. Keep in mind only the GM stuff will do EVERYTHING for GM Vehicles.
3) Snap On Solus (This will do a lot not only on GM Vehicles but others as well. And it can do some of the advanced functions like Automated Brake Bleed on the ABS unit just like the GM Tech 2 and GM MDI) – Keep in mind there are many functions that the Snap On won’t do. The Tech 2 and MDI will allows you the option to access and control everything on GM Vehicles.
4) Mongoose Pro GM II (It can do things as GM MDI does.) Even the cheap Mangoose China clone is able to recover and reprogram modules perfectly and works with the newer h***ed 2017 GDS2!!!
In summary, Magoose Pro GM II features:
Plug and play: yes!
GM diagnostics and programming: confirmed!
Module recover and reprogramming: confirmed!
SPS programming speed: fast!
“Data Bus Diagnostic” Tool software: compatible!
Tech2win, GDS2, SPS: compatible!
Mongoose Pro GM II ALMOST does everything the MDI does!

3 août 2018

How to Identify Mercedes Benz key type by CGDI MB

Classé dans : car key programmer — carsets @ 9 h 07 min

How to identify Mercedes Benz key types and information using CGDI Prog MB key programmer.

version 51

Insert the key into CG-MB
Read and display related key information

version BE

Insert the key into CGDI MB
Read and display related key information

Version FBS4

Insert the key into CG-MB
Read and display related key information

Gaskustoms |
Mon Deux-Roues |
Autopassion34 | | Créer un blog | Annuaire | Signaler un abus | Handlebar
| Noirmatpeinturecovering
| Coveringmatvoiture