Carsets

30 août 2017

SKP1000 Key Programmer adds 2007 Chrysler 300C key

Classé dans : car key programmer — carsets @ 5 h 34 min

Guide to use SKP1000 key programmer to add ID46 electronic key on a 2007 Chrysler 300C by OBD.

 

Key information:

Original key: 3-button straight key

Frequency: 433MHz

Chip: 46 chip

Remote programming: Automatically generate remote

Pin code/security code: No need

Device: SKP1000 tablet car key programmer

 

Procedure:

Connect SKP1000 key programmer with vehicle via OBD socket

Turn ignition ON

skp1000-300c-2007-1

Select Chrysler

skp1000-300c-2007-2

Select 300C

skp1000-300c-2007-3

Select Immobilizer system

Choose OBDII connector

Turn ignition ON

Press YES to go on

skp1000-300c-2007-4

Select Add new key

skp1000-300c-2007-5

Insert new key to be programmed

Turn ignition ON

Press YES to continue

skp1000-300c-2007-6

SKP-1000 adds Chrysler 300C 2007 key success.

Automatically generate remote control and start engine.

http://www.skp1000.org/

26 août 2017

How to activate Airbag Universal Repair 3.0 Ultimate

Classé dans : car diagnostic tool — carsets @ 8 h 50 min

Airbag Universal Repair 3.0 ultimate is the best software for the repair of airbag, accompanied by a graphical interface very simple and intuitive. Here is the step-by-step guide to install and activate airbag reset tool software.

 

How to install airbag universal repair software on Windows 7:

Please close all anti-virus software and then copy airbag software to C drive from CD

Airbag-Universal-repair-1-1
Step 1: Install Setup

Copy airbag software from C drive to desktop

Airbag-Universal-repair-1

Open AirbagReq3 Setup folder

Airbag-Universal-repair-2

Run Setup.exe

Install airbag unviersal repair ultimate setup wizard, click Next

Airbag-Universal-repair-4

Choose install setup to C:/Program Files/Airbag Repair3, click Next

click Next

Tick create a desktop icon, click Next

Airbag-Universal-repair-5
Click Install
Click Finish
Step 2:  Activate Software

Open airbag universal repair software folder on desktop

Airbag-Universal-repair-6
Open Patch folder
Copy all these files

Airbag-Universal-repair-7
Right click Airbag universal repair software shortcut on desktop->Property->Browse folder

Airbag-Universal-repair-8

and replace these files to C:/Program Files/Airbag Repair3
Open Airbag universal repair software shortcut on desktop, software prompts “License file needed
(AirbagR.key)”

Airbag-Universal-repair-9
Press YES

Airbag-Universal-repair-10
Hardware ID mismatch.Current HWID is:
1+*************************************
(Ctrl+V to paste)
Press YES

Please press “Control+V” and then press OK, copy the activation ID and send it to us.
We will send license key back to you.

 

Step 3: Install USB driver

Airbag-Universal-repair-11
After receive AirbagR.key, copy and paste it to C:/Program Files/Airbag Repair3

Airbag-Universal-Repair-3-0

Plug the USB dongle into computer

Open airbag software folder on desktop

Airbag-Universal-repair-12
Open airbag reset tool USB Dongle Driver V4.0.0.4 folder

Airbag-Universal-repair-13
Install InstWiz3.exe
Tick install driver
click Next

Airbag-Universal-repair-14
Finish install USB driver

 

Step 4: Run Software
Open Airbag Universal Repair software on desktop

Airbag-Universal-repair-15
Disclaimer: This software is supplied only such as test and for not moving cars. We will not be responder for any
direct and indirect damages from the use of the files created by the software

How to use Airbag Universal Repair Code Calculator? (Example)

Airbag-Universal-Repair-example

1. Choose the Brand
2. Choose the System
3. Open the read file with your programmer, UPA USBXprog, Wellon Series VP/GP etc
4. Process the file to execute the repair
5. Save the repair file

At this point reprogramming the ECU airbag with the repair file.

 

Airbag Universal Repair Ultimate Software  Car List

23 août 2017

How to use SKP1000 to add Toyota Levin 2016 Key

Classé dans : car key programmer — carsets @ 9 h 25 min

Easy procedure to add a key on Toyota Corolla Levin 2016 with SKP1000 key programmer by OBD.

add-toyota-levin-key-1

Procedure:

Connect SKP-1000 tablet car key programmer with vehicle via OBD socket

Turn ignition ON

Select IMMOBILIZER function

add-toyota-levin-key-2

Select Toyota car brand

add-toyota-levin-key-3

Select By System

Select non-smart key

add-toyota-levin-key-4

Select System 2

add-toyota-levin-key-5

Select Add key

add-toyota-levin-key-6

SKP1000 prompts to insert the registered master key

Turn ignition ON

Press YES to continue

add-toyota-levin-key-7

Remove the registered key

Then insert a key to be added

DO NOT turn ignition to ON position

Press YES to continue

add-toyota-levin-key-8

add-toyota-levin-key-9

Wait for the dashboard immobilizer indicator go off

Add key success!

http://www.skp1000.org/

5 août 2017

OBDSTAR X300 DP Read Pin Code and Program Key for Chevrolet Cruze 2014

Classé dans : car key programmer — carsets @ 8 h 34 min
Guide to read pin code and program key for Chevrolet Cruze 2014 when all keys lost by using OBDSTAR X300 DP Key Master DP key programmer via OBD.
Connect X300 DP
Select brand: GM
x300-dp-chevrolet-1
Select Read PIN Code
x300-dp-chevrolet-2
Select Chevrolet ->Cruze-> Year 2014
x300-dp-chevrolet-3
x300-dp-chevrolet-4
x300-dp-chevrolet-5
Turn ignition to ON position
x300-dp-chevrolet-6
OBDSTAR X300 DP read pin code success
x300-dp-chevrolet-7
Select Immobilizer system
x300-dp-chevrolet-8
Select By vehicle
x300-dp-chevrolet-9
Select region
x300-dp-chevrolet-10
Select Chevrolet->Cruze-> Without Smart
x300-dp-chevrolet-11
x300-dp-chevrolet-12
x300-dp-chevrolet-13
Select All key lost
x300-dp-chevrolet-14
X300DP requires to enter security pin code to access
x300-dp-chevrolet-15
Turn ignition OFF for 5 seconds, then turn in ON
Configuring system, please wait for 10 minutes
Turn ignition OFF, remove the key
Close the door on the driver side, make sure all electricities are off
OBDSTAR X300 DP tablet will prompt whether to program next key, press YES to continue.
Turn ignition OFF, remove the key, repeat this for 5 times
Then turn ignition ON
Press YES to program next key
Turn ignition OFF, remove the key
Configuring, wait for 45 seconds
Turn ignition ON
Program Success.
http://www.key-programmer.org/2017/08/05/obdstar-x300-dp-program-cruze-2014-all-keys-lost/

Gaskustoms |
Mon Deux-Roues |
Autopassion34 |
Unblog.fr | Créer un blog | Annuaire | Signaler un abus | Handlebar
| Noirmatpeinturecovering
| Coveringmatvoiture