Carsets

31 mai 2017

Where to Download BMW ISTA-D 4.05.31 SDP 4.05.30 ISTA-P 3.61.4

Classé dans : car diagnostic tool — carsets @ 8 h 27 min

Good news for sharing: 05.2017 BMW ISTA 4.05.31 is released now!

Here obdii365 again to provide you free download link to BMW ISTA 4.05.31 Standalone+ SQLiteDBs 4.05.30 + ISTA-P 3.61.4.002. Hope it helps!

bmw-ista-4-05-31-sdp-ista-p-download-update-1

bmw-ista-4-05-31-ista-p-3-61-4-download-update-2

Download BMW Rheingold ISTA 4.05.31 Standalone + SQLiteDBs:

https://mega.nz/#!ltY1jDzD!GyaBgKvZ_h3IK5W0zjaZ5cqB7pL8iNdrnTVMRAkm1eQ

bmw-ista-4-05-31-sdp-ista-p-download-package-3

Standalone versions of ISTA-D and ISTA-P.

SQLiteDBs 4.05.30, including RU, EN, DE, OTHER.

Use 7-zip 16.04 or higher to unpack archives.

All installed and ready to work.

Instructions for installation, configuration and solution of possible errors, is located in the Tools folder (FAQ-RU.pdf and FAQ-EN.pdf).

Use Adobe Acrobat Reader DC to view PDF files.

 

(Thanks to Spider80’s sharing! For ISTA-P Loader thanks to beemerboy88.)

Note: Please enjoy this new update at your own risk!

If you are looking for a tested 100% OK version, here V2017.03 BMW ICOM ISTA-D 4.04.12 HDD WIN7 Multi-language is your best choice.

bmw-ista-4-04-12-software-hdd-4

BMW ISTA 4.05.31 Tools Recommended

BMW ICOM A2 WIFI

BMW ICOM A3

BMW ICOM NEXT

BMW INPA K+DCAN Cable

BMW ENET Cable

 

Useful Tips for BMW ISTA 4.05.31 Installation

Recommend to install BMW ISTA in VMware WS V12x with Win7 x64 Guest. Earlier VMware versions down to 10 probably as well.

 

VM WS installation portability is a very important issue.

 

For disk space need runs to 350 GB.

 

X86 apps in VM x64 environment like itoolradar may arose a java problem.

 

Running ISTA /P requires good charging equipment with constant additional load otherwise it will quit session .

BMW currently advices supply > 70A. For older cars like E-series, 25A seem to be ok.

29 mai 2017

Read BMW CAS2 mc9s12dg256c by Xprog M

Classé dans : ECU chip tuning tool — carsets @ 6 h 02 min

I tried to read BMW CAS2 mc9s12dg256c by using Xprog V5.55 programmer. It gave me communication error. Can you point me which I need to choose to read or the correct way to read with Xprog-m box?

Xprog can read bmw cas2 mc9s12dg256c 1

Xprog can read bmw cas2 mc9s12dg256c 3

Xprog can read bmw cas2 mc9s12dg256c 2

Xprog m ecu programmer reads good on this ecu.
Step 1: Xprog > Device > MCU/MPU > Freescale HC(s)2-secured > MC9S12-EEPROM-secured (at very bottom)

Step 2: Xprog > File >New Bin File.
Step 3: Xprog > Run > Read

You may want to take a little more care with your connections. Cas is easy to kill. Your Vdd and BKGD looks to be bridging.

CAS2.mc9s12dg256.2k79x.XPROG-BDM-PINOUT

http://www.obdii365.com

23 mai 2017

GM MDI GDS2 Tech2Win V8.3.103.39 Windows 7 Sata HDD

Classé dans : car diagnostic tool — carsets @ 8 h 31 min

The latest GM MDI GDS2 Tech2Win software V8.3.103.39 for Vauxhall Opel Buick and Chevrolet comes in Windows 7 SATA format HDD.
Software Version: V2017.2.0
System: Windows 7 64bit

gm-mdi-gds2-gm-mdi-gds-tech-2-win-software-1

gm-mdi-gds2-gm-mdi-gds-tech-2-win-software-2

gm-mdi-gds2-gm-mdi-gds-tech-2-win-software-3

gm-mdi-gds2-gm-mdi-gds-tech-2-win-software-4

Update time: GM Global V2017.2.20
Used for: Both China GM MDI USB version and GM MDI WiFi version scanner
Easy to use: Insert the HDD with GM MDI gds2 software into your computer; the software can be used directly with the GM MDI scanner, which doesn’t need activation by users.
GM MDI Multiple Diagnostic Interface scanner will provides the full dealer level diagnostics and programming for all Vauxhall /Opel 16 pin vehicles from 1996 to 2017, support Chevrolet up to 2018. The GM MDI scan tool diagnostic software gds2 can be installed on 2.5′ SATA HDD,  with the Win7 Operation System.

Attention please!

* Please make sure your computer supports Win7 64 bits system.
* Computer system requirements: the year after 2008, 4GB RAM
* If computer failed to boot up, please enter BOIS system and change the SATA driver to AHCI.

 

Recommended  Best quality GM MDI Interface with WiFi card:
gm-mdi-wifi-pcb-1

gm-mdi-wifi-pcb-2

gm-mdi-wifi-pcb-3

gm-mdi-wifi-pcb-4

http://blog.obdii365.com/2017/05/23/gm-mdi-gds2-tech2win-v8-3-103-39-support-gm-update-to-2018/

17 mai 2017

Free Download Renault CAN CLIP V167 and Installation

Classé dans : car diagnostic tool — carsets @ 5 h 18 min

Renault CAN Clip diagnostic Interface for Renault & Dacia software has newly released to V167.

 

Software Version: V167

Operating System: Windows 7

renault-can-clip-167-win7-download-install-4

Renault CLIP V167 Free download No Pass

https://mega.nz/#!IcwSVLTY!gXLAiI_Rt1gi49h51aPSee35t1IkwMiKK1Vy3YbDc8Q

 

 

Renault CAN CLIP V167 Win 7 Test Report: Successfully

Renault can clip diagnostics……..Worked!

Renault can clip reprogramming……..Worked!

Renault can clip china clones……..Worked!

– Renault can clip the best-quality version (no communication issues)

– The most populous version

– The cheapest version ($95)

 

How to install Renault CAN CLIP V167  on Windows 7?

Step 1  run Crack Renault CLIP

Insert CAN CLIP 167 disk E: and open it.

Open folder Activation(Patch V3)

Open Crack Renault CLIP registration entries

Register Editor: click Yes.

Click OK.

 

Step 2  install Renault CLIP 167

Run setup.exe

CLIP V165 is running automatically

Click the laptop icon (FIRST INSTALLATION) in CLIP V167 interface.

renault-can-clip-167-win7-download-install-(1)

 

Click “I accept…agreement” and click Next.

Select country. (here, select OTHER COUNTRY). and click Next.

Select a setup language and click Next.

Manufacturer:Renault. click Next.

Click Next to begin copying files.

Installing clip….

Renault can clip installation success

RESTART your computer

Finish CLIP V167 first installation

renault-can-clip-167-win7-download-install-(2)

Step 3  setup CLIP properties

Open CLIP properties on Desktop

Open file location:

Cut RSRWin application in local disk C:/ CLIP_X91/ Lib/ Application

Paste it on Desktop

Copy RSRWin application on disk E: CLIP V167

And paste the RSRWin (from disk E:) in local disk C:/ CLIP_X91/ Lib/ Application

Close CLIP properties

 

Step 4  register Renault CAN CLIP V167

Run RSRWin application in local disk C:/ CLIP_X91/ Lib/ Application

Accept the license and register CLIP

Are you part of the Renault Network? Select No.

Enter the unlocking code with the picture guide Renault Clip Registeration Step 4 in the folder Activation(Patch V3)

renault-can-clip-167-win7-download-install-(3)

 

then click Confirm.

Registration success: click OK.

Replace “RSRWin” in C:\CLIP_X91\Lib\Application with”RSRWin” on Desktop

Prompt: installing device driver software…

Prompt: device driver software installed successfully

 

Step 5  open Renault CAN CLIP v167 to begin diagnosis

Run CLIP Renault software

There will be a computer security alert. Just click Unlock.

renault-can-clip-167-win7-download-install-(5)

renault-can-clip-167-win7-download-install-(6)

renault-can-clip-167-win7-download-install-(7)

renault-can-clip-167-win7-download-install-(8)

renault-can-clip-167-win7-download-install-(9)

Done!

http://blog.obdii365.com/2017/05/16/install-renault-can-clip-v167-on-windows-7/

15 mai 2017

How to Install INPA on Win 10 64-bit Step by Step

Classé dans : car diagnostic tool — carsets @ 9 h 00 min

Here is the educational tutorial on installing BMW INPA/EDIABAS diagnostic software on Windows 10 64-bit. Enjoy.

Disclaimer:

You are at your risk.  INPA will work with few select things for an E38 such as resetting adaptations, diagnostics, code reading, etc. NCS Expert will NOT run on a 64-bit operating system. If you have a 32-bit version of Windows 10, please feel free to try ECS Expert and let me know if it works!
Credits: perishalive92 https://www.bimmerforums.com/forum/showthread.php?2340998-INPA-Windows-10-64-bit-Installation-Guide

 

Pre-installation Download:

BMW INPA K+DCAN cable USB interface

You will Winrar or 7zip or a .rar file extractor similar to those.

Inpa software 

https://www.dropbox.com/s/wvgykv0zg2scju9/INPA.rar?dl=0

INPA Cable software

https://www.dropbox.com/s/2brvd7i924s23ps/INPAcable.rar?dl=0

 

Should you get ANY errors or pop-ups during any phase of the installation, ignore them. INPA will still install.

 

Pre-Installation
1.Download all required files and programs,as listed below. Also you should have the K+DCAN cable in your possession(link provided below).
2.Extract the INPA.rar to your desktop. You will be left with INPA folder.
3.Extract INPAcable.rar to your desktop. You will be left with INPA cable folder.

Installation

 Phase 1
1.Open INPA cable folder and move the top four folders (step1, step2, step3 and driver) to Windows(C folder of your PC.
2.Whilst in Windows(C, open 01_Step1 folder and copy EC-APPS over to your Windows(C drive.
3.Go back to 01_Step1 folder and open the NFS folder. Open Entpackt folder. Open disk 1, find SETUP.exe and right-click it. Goto Properties/Compatibility and set it to run in compatibilty mode for Windows XP (Service Pack 3). Also, check the box for Run as Administrator. Hit Apply then Ok.
4.Double-click SETUP.exe to launch.
5. Once window pops up, select Windows XP. Click Weiter (it means Next).
6.Click Weiter 3 more times. Make sure User Mode is selected. Click weiter.
7.Make sure top choice is selected (1 Parametri……). Click Weiter.
8.Ensure OBD is selected. Press weiter. Ensure Kein API-TRACE. Click weiter. Ensure Kein IFH-TRACE is selected. Click weiter.Ensure Komfort(.IPO) is selected. Press weiter.
9.Press OK. Let install. Press ok, and again. Press any key to continue.
10.Select Ja,Computer jetzt neu starten. Click Breeden. This will restart your PC as needed.

Phase 2
1.Goto Windows(C/02_Step_2/INSTALL and right click on Instprog. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch.
2.Press OK if prompted. Select Enlgish then press weiter.
3.Press continue and continue again. Ensure destination is under C:
4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue.
5.Check off all white boxs. There will be 2 update and 1 complete that needs to be checked. Press continue, and again. You may get error. ignore it. Otherwise, press End.
6.Restart your PC once more manually.

Phase 3
1.Goto Windows(C/03_Step_3/INSTALL and right click on Instprog. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch.
2.Press OK if prompted. Select English then press weiter.
3.Press continue and continue again. Ensure destination is under C:
4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue.
5.Under INPA 5.0.1, check off Update. Under NCS Expert 3.0.8, check off Complete. Press continue.
6.Click on Rename. In the box, type the number 1 and press continue, and again. You might gett error. Ignore it. IF prompted, press End.

Phase 4
1.Plug in your INPA K+DCAN cable. You will from now on use ONLY that port.
**Windows 10 will automatically update the driver IF needed. Windows 10 also already has a serial function. This is all we need to modify.**
2.In your search box (lower left of screen next to Windows button), type “Device Manager”. Click on the top option.
3.Once in Device Manager, locate Ports(COM & LPT) and click on the little plus sign next to it. It should now show USB Serial Port (COMx) under Ports(COM & LPT). **The little ‘x’ is in place of whatever number you have the cable plugged into).
4.Right-click on USB Serial Port (COMx) and click Properties.
5.Goto Port Settings tab. Click Advanced. Change the COM Port Number to COM1.
6.Change Latency Timer from 16 to 1. Press ok. Press ok again. Close Device Manager.
7.Goto Windows(C/Driver_D_CAN_USB and double-click OBDSetup.exe. Press Enter.

Phase 5
1.Go into Control Panel/System/Advanced System Settings/Environment Variables.
2.Ensure that System Variables TMP and TEMP both contain the path C:\EDIABAS\Bin.
3.If not, manually add it in. Example: C:\Windows\Temp;C:\EDIABAS\Bin
4.the ‘;’ is important to seperate paths. Please ensure you put that in there then add in the rest.

Phase 6
1.From Desktop, open INPA folder then open the second INPA folder. Right click on Step_1_Install_BMW_Tools and click Poperties. Goto Compatibilty and run the program in compatibility mode for Windows 7. Also, run as administrator. Click Apply then ok. Doulbe-click to launch.
2.Enusre destination path is C:\BMW Tools , if it is not change it to that.
3.Press Install. You will get an error. Press ok.
4.Goto Windows(C/BMW Tools/Programminstallation and right-click on setup.exe. Set it up for compatibility mode as stated in Phase 1, step 3.
5.double-click to launch. Select English, press ok. Press Next. Accept and press next. Press next again and again.Ensure the installation destination is C:\EDIABAS, click next.Ensure installation destination is C:\EC-APPS\NFS,click next.Ensure installation destination is C:\EC-APPS\INPA, click next.Ensure installation destination is C:\NCSEXPER, click next.Ensure start menu folder is BMW Standard Tools. click next.
6.You do NOT have to perform the data backup if not desired. I didn’t. Uncheck box if not wanting data backup and click next.Ensure hardware-interface setting is STD:OBD and click next.Ensure COM port for serial OBD is Com1. Check the box for USB to serial adapter. click next. Click Install. If any errors, ignore them.

Phase 7
1.Goto Desktop/INPA/INPA and right-click the file ‘Step 2_ Install INPA.exe‘.Set up for compatibility as mentioned in Phase 6,step 1.
2.The Destination Path should be ‘C:\temp’, leave as it is and click ‘Next’.
3.Choose ‘English’ and select ‘Continue’ and ‘Continue’.
4.Select ‘C:\’ and then ‘Continue’.
5.Select ‘BMW Group Rectification Programs UK’ and click ‘Continue’.
6.Tick ‘Update’ for all options where not grayed out, then ‘Continue’.
7.Select ‘OBD’, then ‘Continue’ and ‘Continue’.
8.The installation will begin and complete.

Phase 8
1.Goto Desktop/INPA/INPA and right-click the file ‘Step 3_ Final Update.exe‘.Set up for compatibility as mentioned in Phase 6,step 1.
2.The Destination Path should be left as it is, then select ‘Install’.
3.Select ‘Yes to all’.
4.Once completed, the window will close itself.

Phase 9
1.Goto Desktop/INPA/INPA and double-click the file ‘serial port.reg‘.
2.When prompted, select ‘Yes’ and ‘Yes’. You will receive confirmation that your registry has been updated.
3.Locate the file ‘C:\EDIABAS\Bin\obd.ini’ and copy this file into your Windows folder.
4.Edit the file ‘C:\EC-APPS\INPA\CFGDAT\INPA.INI’ in Notepad, locate the section that starts with ‘//F3’, remove the slashes at the beginning of the three lines of text, and amend any instance of ‘F10’ to ‘E46’.
**Step 4 is only needed if you are working on an E46. Otherwise, ignore this step!

In theory, you will not have INPA diagostic software on your desktop. Right-click it and set up compatibility mode as mentioned in Phase 1, step 3. Double click to launch.

http://www.obdii365.com/service/bmw-inpa-ediabas-windows-10-64-bit-installation-guide-83901.html

12 mai 2017

How to Connect Launch X431 IV WiFi and Bluetooth

Classé dans : car diagnostic tool — carsets @ 8 h 41 min

 

Diagun II vs. Diagun III

Launch-X431-Diagun-III-vs-diagun-2

Diagun III vs. Diagun IV

Item Diagun III Diagun 3 Launch X431 Diagun IV Diagun 4
Main unit Image  diagun-3  diagun-vi
Bluetooth DBscar Connector  diagun3-bluetooth-connector  diagun-vci-bluetooth-connector
Operating System WIN CE 5.0 Android 7.0
Processor 400 MHz ARM9 Quad core 1.1 GHz
Memory 1G TF Card  1GB (Expandable up to 32GB)
Storage 1GB 16GB (Expandable up to 64GB)
LCD Screen 194X86X33MM, 4.3-inch LCD with touch screen  5.5 inch IPS screen with a resolution of 1280 x 720 pixels
Battery 3800 mAh 2500mh rechargeable polymer lithium battery
Offical Website www.dbscar.com www.dbscar.com
Language English, Spanish, French, German, Japanese, Korean, Russian,Arabic English, German, Japanese, Russian, French, Spanish, Russian, Arabic ,Korean Traditional Chinese…
Update 1 Year Free Upgrade 2 Year Free Update Online
Bluetooth theoretically 100m, suggest 15-20m Bluetooth 4.1. 

10M (Without Obstacle)

WiFi USB Wi-Fi: WLAN 802.11b/g/n
Funtion Full diagnosis (Read/erase DTCs, display live data stream etc) Full-diagnosis, Oil Reset Service
Steering Angle Calibration
Electronic Parking Brake Reset
Battery Register / Battery Maintenance
ABS Bleeding
Electronic Throttle Position Reset / Learn
Diesel Particulate Filter (DPF) Regeneration
Tire Pressure Monitor System Reset(Note: some China cars have Speicial Functions)
Vehicle/Car List Software: Demo,Smart OBDII
America: Ford,Chrysler,GM,Acura,INFINITI, 

Lexus
Australia: Ford
Brazil: GM,

Fiat
China:  Brilliance,

BYD,

Changan,

ChangCheng,

Changhe,

Chery,GEELY,

Gonow,HaFei,

JAC,Jiangling,

SGMW,Tianjin

FAW,Weili,

Xiamen Golden,

XinKai,

ZhongShun,

Zhongxing,

ZOTYE
Europe: Audi,

Benz,BMW,

Citroen,

Dacia,

Ford,Fiat,

Jaguar,

Lancia,

Landrover,

Opel,

Peugeot,

Porsche,

Renault,

Romeo,

Rover,

Saab,

Seat,

Skoda,

Smart,

Transporter&

V-Class,

Volkswagen,

Volvo
Japan:

Daihatsu,

Honda,

JPIsuzu,

Mazda,

Mitsubishi,

Nissan,

Subaru,

Suzuki,

Toyota
Russia: GAZ,

VAZ
Korea: Kia,

Ssangyong,

Hyundai,

Daewoo

          Abarth Acura 

·         Alfa Romeo

·         Audi

·         Bentley

·         BMW

·         Buick

·         Cadillac

·         Chevrolet

·         Chrysler

·         Citroen

·         Dacia

·         Daewoo

·         Daihatsu

·         Dodge

·         Fiat

·         Ford

·         GAZ

·         Geely

·         GMC

·         Goinggreen

·         Greatwall

·         Holden

·         Honda

·         Hyundai

·         Infiniti

·         Isuzu

·         Jaguar

·         Jeep

·         Lancia

·         Land Rover

·         Lexus

·         Mazda

·         Mercedes-Benz

·         Mini

·         Mitsubishi

·         Nissan

·         Opel

·         Perodua

·         Peugeot

·         Range Rover

·         Renault

·         Saab

·         Seat

·         Skoda

·         Smart

·         Ssangyong

·         Subaru

·         Suzuki

·         Tata

·         Toyota

·         Vauxhall

·         VAZ

·         Volvo

 

Other Cable 9 pcs Non-16 pin cable
Printer Buy SO118 Pinter Buy SO118 X431 Pinter
Price US$ 639 US$ 799

 

Launch X431 Diagun3 User Manual 

Launch X431 Diagun IV User Manual

 

 

How to Connect/Disconnect Diagun IV WiFi?

Wi-Fi Setting

Note: If you don’t need to use Wi-Fi for a while, you can turn it off to conserve battery life.

 

X-431 Diagun IV has built-in Wi-Fi that can be used to get online. Once you’re online, you can register your X-431 Diagun IV, surf the Internet, get apps, send email, launch the remote diagnosis, and check for software updates etc.

Connect to a Wi-Fi network

  1. On the home screen, tap Settings -> WLAN.
  2. Slide the Wi-Fi switch to ON, X-431 Diagun IV will start searching for available wireless networks.
  3. Select a wireless network, y If the chosen network is open, X-431 Diagun IV will connect automatically; y If the selected network is encrypted, a network password will need to be entered. 4. When “Connected” appears, it indicates the Wi-Fi connection is complete.

Note: When Wi-Fi is not required, this should be disabled to conserve battery power. Once it is connected successfully, tap the Wi-Fi network from the list to view its name, link speed, security type, IP address etc. When this tool is in range, it will connect to the previously linked network automatically.

 

Disconnect from a Wi-Fi network

  1. On the home screen, tap Settings -> WLAN.
  2. Tap the network with a Connected status, then tap “Disconnect”.

 

How to register and activate Launch X431 Diagun IV?

User registration

Tap “Login” on the upper right corner of the main menu screen:

register-x431-diagun-vi-1

  1. If you are a new user, tap “New Registration”. See Fig.2

register-x431-diagun-vi-2

Note: To obtain better service, you need to provide real information.

A. Create App account: In Fig. 3, fill in the information in each field and then tap “Register”, a screen similar to the following will appear:

register-x431-diagun-vi-3

B. Activate the VCI connector: In Fig. 4, input the Serial Number and Activation Code, which can be found in the password envelope.

register-x431-diagun-vi-4

Note: To exit and activate it later, tap “Skip”. In this case, you can activate your connector by tapping “Activate Connector” in “Personal Center”.

 

 Activate Connector.

C. Download diagnostic software: Tap “Activate”, a dialog box similar to Fig. 5 will appear:

register-x431-diagun-vi-5

To download the diagnostic software, tap “Yes” to enter the software download page. Tap “No” to download it later. On the download page, tap “Update” to start downloading. It may take several minutes to finish it, please be patient to wait. To pause downloading, tap “Pause”. To resume it, tap “Continue”. Once download is complete, the system will install the software package automatically.

 

  1. If you have registered to be a member, input your name and password, and then tap the “Login” button to enter the main menu screen directly.

Note: X-431 Diagun IV has an auto-save function. Once the username and password are correctly entered, the system will automatically store it. Next time you login the system, you will not be asked to input the account manually.

 

  1. If you forgot the password, tap “Retrieve Password”, and then follow the on-screen instructions to retrieve it.

register-x431-diagun-vi-6

How to set up X431 Diagun IV Bluetooth?

Bluetooth Setting

Enter X-431 Diagun IV Bluetooth setting screen (“Settings” -> “Bluetooth”), slide the Bluetooth switch to ON and X-431 Diagun IV will start searching available Bluetooth device, tap the desired connector to pair. By default, the Bluetooth name is 98729*****00 (where ***** stands for 5 digits.).

Note: In case no Bluetooth setting is done before diagnostic software is launched, you can also configure it while using the software.

http://blog.obdii365.com/2017/05/12/launch-x431-diagun-iv-vs-diagun-iii-scanner/

9 mai 2017

Kess V2 Ksuite V2.33 Download and Installation

Classé dans : ECU chip tuning tool — carsets @ 5 h 32 min
Kess V2 master OBD2 manager ecu tuning kit software updated! Ksuite 2.33 released! Here is how-to’s of Kess V2 2.33 software installation instruction.
Kess v2 clone worked:
Ksuite 2.33 is confirmed working with kess clone with-
item no. se87: KESS V2 firmware v3.099 Master Version
item no.se87-e: KESS V2 Master Firmware V3.099
item no.se87-c: KESS V2 Firmware V4.036
item no.se87-ck: KESS V2 Truck Version Firmware V4.036
For other versions of kess v2 programmer, you need try at your risk.
Engineers at obdii365.com only tested kess v2 above.
How to install Kess V2 Ksuite V2.33 software:
Disable the network connection first!!!
Open the disk E: K-Suite 2.33
Go to folder KSuite V2.25-V2.33
Copy K-Suite 2.33 to Desktop
Run K-Suite 2.33 on Desktop
Next to install Ksuite 2.33 software
install-kess-v2-setup
Install
Install….
Yes to accept the terms
Install….
Select the language for this installation dialogs
select-the-language
Next to install Driver USBDEVICEDRV (1.00.011)
Next
Next
Install
Install….
Finish installation of Driver USBDEVICEDRV
finish-install-driver
The system automatic runs Ksuite
Select a language for use
kess-v2-language
It’s ksuite 2.33, the newest tested version
kess-v2-v2.33
Close k-suite
Delete the K-Suite 2.33 on Desktop (copied from disk E: just now)
Open K-Suite properties on Desktop
Find target location: delete folder “help” in C:\KSuite
Copy folder “help” in disk E: & paste it in C:\KSuite
Close K-Suite properties
The Wizard helps you install software for USB Device
Install the software automatically
Next
Finish installation of software for USB Device
install-usb-device
Again, run K-Suite on Desktop for BMW E90 ECU reading
Open Computer management
Select Device manager->Universal serial bus controllers->USB device
device-manager
Then read ecu data via K-Suite 2.33
start-to-read-ecu
Ksuite 2.33 reads ECU data of BMW 3 series E90 2005
kess-v2-2.33-read-e90-data-1
kess-v2-2.33-read-e90-data-2
kess-v2-2.33-read-e90-data-3
kess-v2-2.33-read-e90-data-4
kess-v2-2.33-read-e90-data-5
kess-v2-2.33-read-e90-data-6
kess-v2-2.33-read-e90-data-7
kess-v2-2.33-read-e90-data-8
kess-v2-2.33-read-e90-data-9
kess-v2-2.33-read-e90-data-10
kess-v2-2.33-read-e90-data-11
kess-v2-2.33-read-e90-data-12
kess-v2-2.33-read-e90-data-13
kess-v2-2.33-read-e90-data-14
kess-v2-2.33-read-e90-data-15
http://blog.obdii365.com/2017/05/08/install-kess-v2-ksuite-v2-33-on-windows-xp/

6 mai 2017

Free Download Scania VCI3 SDP3 V2.31 V2.30

Classé dans : truck diagnostic tool — carsets @ 9 h 19 min

Good news for sharing!

Here you can free download Scania SDP3 2.31 (05.2017) and Scania SDP3 2.30 (04.2017) software for Scania VCI2 and Scania VCI3 SDP3 Scanner!

scania-sdp3-2-31-vci2-vci3-software-download-1

(05.2017) Scania SDP3 2.31 software free download in mega:

https://mega.nz/#!DYExVD7Y!Z7vVu-KB6hwABJ8LOyYeyd4VyhuI7w6nAqsVDYUzbrw

Password: cimi

scania-sdp3-2-31-vci2-vci3-software-download-2
(04.2017) Scania SDP3 2.31 software free download in mega:

https://mega.nz/#!dcU3WLJL!iNjRAo_zKbkEoI0ArlBoXfcBvRvrLlKlB7IJnqN6SLo

No pass!

scania-vci2-vci3-sdp3-2-30-software-3

Note: Latest Scania SDP3 2.31 and Scania SDP3 2.30 should work with Scania SDP3 VCI3 truck diagnostic scanner. But please still enjoy at your own risk since software now is still individually tested.

scania-vci-3-wifi-truck-diagnostic-scanner-4

What software is tested OK with Scania VCI 3 by professional?

Scania SDP3 V2.27 without USB Dongle

NO need Activation

http://www.obdii365.com/wholesale/sdp3-software-for-scania-vci2.html

Scania XCOM 2.27 without USB Dongle

Read, save and modify ECU data

http://www.obdii365.com/wholesale/developer-software-xcom-227-for-scania.html

 

http://obd365.blogrip.com/2017/05/06/scania-sdp3-2-31-2-30-free-download-for-vci2-vci3/

Gaskustoms |
Mon Deux-Roues |
Autopassion34 |
Unblog.fr | Créer un blog | Annuaire | Signaler un abus | Handlebar
| Noirmatpeinturecovering
| Coveringmatvoiture