Carsets

  • Accueil
  • > Archives pour décembre 2016

29 décembre 2016

Program SUZUKI Alivio Immo Key by Xtool X-100 Pad

Classé dans : car key programmer — carsets @ 7 h 30 min

Xtool X-100 PAD can perform key programming, mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset , EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis etc. Here obdii365.comengineer will show you how to program SUZUKI Alivio immo key without pincode via X100 Pad key programmer.

 

Device: Xtool X100 PAD OBDII tablet key programmer

Vehicle: SUZUKI Alivio

 

Step 1: Prepare

Connect VCI Box with car OBDII port

xtool-x100-pad-program-suzuki-key-1

Switch ignition on and Power up X-100 Tablet to connect with VCI Box via Bluetooth

xtool-x100-pad-program-suzuki-key-2

 

Step 2: Choose vehilce model

Choose “IMMOBILIZATION” option on X100 PAD main screen

Then agree the Disclaimer

xtool-x100-pad-program-suzuki-key-3

Tap “SUZUKI” and choose “immobiliser”

xtool-x100-pad-program-suzuki-key-4

xtool-x100-pad-program-suzuki-key-5

Next, choose vehicle model. X100 support most Asian, Europea, America, China makes, here we choose suzuki Alivio

xtool-x100-pad-program-suzuki-key-6

 

Step 3: Xtool X-100 PAD Program keys

Select “Program Keys(Free pincode)”

xtool-x100-pad-program-suzuki-key-7

X100 PAD will remind you after performing this function, all keys will be erased, tap “YES” to continue

xtool-x100-pad-program-suzuki-key-8

Due to we have switched ignition on, so here we just press OK

xtool-x100-pad-program-suzuki-key-9

It is communicating, wait for a while

Press OK to continue

xtool-x100-pad-program-suzuki-key-10

Program success!!! If you want you program another one, press YES to continue. If not, press NO to return

xtool-x100-pad-program-suzuki-key-11

Done! Now the key munber is 1

xtool-x100-pad-program-suzuki-key-12

Finally switch ignition off to complete the program, and click OK to exit the system

xtool-x100-pad-program-suzuki-key-13

xtool-x100-pad-program-suzuki-key-14

Total procedure will be carried out with 3 main steps within 5 minutes, very fast.

http://www.key-programmer.org/2016/12/29/xtool-x100-pad-program-suzuki-alivio-immo-key/

15 décembre 2016

How to use CN900 Mini to clone Mazda 4D63 Key Chip

Classé dans : car diagnostic tool — carsets @ 7 h 55 min
CN900 Mini transponder key copy machine can directly program 4D, 4C, 46, G chips no need any other box, this blog will show you how to copy Mazda 4D63 Chip.
Tool used: Mini CN900 Key Programmer
Vehicle model: Mazda 3
Step 1.
Start CN900 Mini
Insert the original transponder key into the slot
Press ‘READ&COPY’ button on the menu.
READ&COPY
CN900 Mini key programmer will automatically read out the key code and the key type is 63.
Notice: Don’t move the key away
Don’t move the key away
chip-type
Step 2.
Press the ‘DECODE’ button (Do not move the key)
Waiting… decoded successfully.
decoding
decode-success
Step 3.
Remove the original key and put the new 4D63 chip into the upper small slot and press the “COPY” button.
put-original-chip
copying...
Verify Data and then “success”.
verify-chip-data
copy-chip-success
CN900-MINI-COPY-MAZDA3-4D63-CHIP-8
CN900-MINI-COPY-MAZDA3-4D63-CHIP-9Done! Mini CN900 copy 4D63 chip for Mazda 3 successfully only in 3 steps!
http://obdii365.blogspot.com/2016/12/copy-mazda-4d63-chip-via-cn900-mini.html

14 décembre 2016

Ktag KTM100 V7.003 test works as original trasdata

Classé dans : ECU chip tuning tool — carsets @ 7 h 49 min

Started a topic of “Is it possible to read edc17c64 with ktm100?” in an auto forum.

 

And this is the post with the most likes:

“I made for my friend remap of skoda octavia 3 rs tdi. he bought china Ktag ktm100, the vendor send me dump, i made remap without doi decalibration and lambda for 1100 after 1000mg of air. car is running and starting without problem. i start writing here to know how upgrade to fake firmware v7.003. I think in clone Trasdata is allowed protocols menu with edc17c64 and edc17c66 if firmware = 7.003. with trasdata menu to confirmation then there is true and china ktm100 can do edc17c64 !!!”

 

Ordered KTM100 firmware v7.003 from obdii365.com and received it last weekend.

ktm100 china is in fact trasdata i think…

Also it’s kind of the same as Ktag v6.070.

But this Ktag does not support BMW F chassis petrol and Mercedes-Benz W222
Only possible after fw 7.020 and ksuite 2.22

 

ktm100 can do edc17c64 gpt!!! (And no possible 2l tdi 184 edc17 c64 wi)

this is my photo of edc17c64 with china no reworked ktm100 done

se80-d-ktag-ktm100-v7-pcb-1

se80-d-ktag-ktm100-v7

ktm100-fw7.003-read-edc17c64-1

 

 

ktm100-fw7.003-read-edc17c64-2

ktm100-fw7.003-read-edc17c64-3

ktm100-fw7.003-read-edc17c64-4

ktm100-fw7.003-read-edc17c64-5

ktm100-fw7.003-read-edc17c64-6

ktm100-fw7.003-read-edc17c64-7

These new ecus i have tested:
BMW 520d F10 EDC17C41 DDE8

Volvo edc17cp48 GPT
Mercedes CLA 217 1.6turbo MED17.7.3 GPT
Honda Edc17 GPT (dont remember exact model)

All seems to work AS ORIGINAL. Toyota Denso included also! And Yes, same as others say, KTM100 is FAKE Trasdata. 100% same tool, same software, same car list, same protocols, just different name. . ktag will not work with ktm100… only if you will apply one patch for this and change .ept…and will be trasdata.

http://blog.obdii365.com/2016/12/14/ktag-ktm100-v7-003-work-as-original-trasdata/

9 décembre 2016

How to tell different Renault CAN CLIP clone?

Classé dans : car diagnostic tool — carsets @ 7 h 58 min

There mainly are three kinds of Renault CAN CLiP diagnostic tool from China, designed by different factories, that come with different printed circuited boards (PCBs).

 

Type 1: CAN CLIP v162 for Renault – CHEAPEST

sp19-d-can-clip-v162-pcb

Source: http://www.obdii365.com/wholesale/can-clip-for-renault-diagnostic-tool.html

 

This is the NEWEST Renault Clip clone, released on Dec. 2016. It is only for $105, the CHEAPEST version, compared to others. Work no issues of the basic obdii functions.

 

 

Type 2: Renault CAN Clip diagnostic interface – HIGH QUAILTY

sp19-c-renault-can-clip-pcb-2sp19-c-renault-can-clip-pcb-1

 

Source: http://www.obdii365.com/wholesale/can-clip-c-for-renault.html

 

This is the BEST quality but most expensive CLIP with the AN2131QC chip, for $135. -So far no issues on reading all the information relating to the vehicle, diagnosing Renault cars models including automatically test all Renault models’ computers, reporgramming, airbag test and other functions.

 

 

Type 3: Renault CAN CLiP V162 – the MOST Populous

sp19-b-renualt-can-clip-pcb-2sp19-b-renualt-can-clip-pcb-1

Source: http://www.obdii365.com/wholesale/renault-can-clip-diagnostic-interface.html

 

CAN CLIP with PCBs designed as above is the MOST POPULOUS version of chinese copies.

Almost Renault models are tested by users and technicians, like Clio II, Laguna II, Laguna III, Scenic II, New Twingo, Megane Scenic, Spider, etc (both no issues of obd2 diagnostics and ecu reprogramming.)

 

So, it can also be the SAFETEST version to use on cars.

 

 

–> Conclusion:

All CLIP versions above only differs in PCBs and price. All have been tested without issues on Automatic test of all computers, Physical measurements, OBD diagnostic tests, Airbag test, Antipollution, Multimeter inEnglish/ German/ Brazil/ Denish/ Spanish/ Finnish/ French/ Italian/ Norwegian/ Dutch/ Portuguese/ Romania/Swedish.

 

Read the following tips if you decide to buy items from China.

 

Tip 1: Quality & Price

In China, you can get anything – at/for any price, problem is that you will have to accept the quality. “You get what you pay for” – And this is more or less true, there will be always someone somewhere “trying to” do it for less, but there are thresholds and once you step under them, you will have to suffer from the results. Quality of a product also depends on the material you purchase (You can’t simply make gold out of wood)

 

Tip 2: Reasons for low costs

The only reason why the obdii diagnostic cables are made in China is because 90% of the materials (micro-controllers and ICs) come from there. That is, it’s mainly about cost, most people would not be ready to pay 3-4 times the price just for the device being made in Europe or the US.

So, items are produced in high quantity and cost saving here

http://blog.obdii365.com/2016/12/09/renault-can-clip-v162-cheapest-and-best-quality/

Gaskustoms |
Mon Deux-Roues |
Autopassion34 |
Unblog.fr | Créer un blog | Annuaire | Signaler un abus | Handlebar
| Noirmatpeinturecovering
| Coveringmatvoiture