20 mars 2019

CG100 Full Version and Standard Version Comparison

Classé dans : ECU chip tuning tool — carsets @ 8 h 02 min
CG100 Prog III standard edition (Item# SR22) and full version (or advanced version) comparison (Item# SR23).

1. The full version cg100 supports reading BMW N13 N20 N55 N45 N46 S63 engine computer data and ISN.
2. The full version supports ECU repair function of Volkswagen and Bentley and ECU data reading function.

3. CG100 Full version supportd the key writing function of BMW land rover.
4. Full function supports baojun 730 MB91 meter adjustment function.
5. Support baic changan airbag repair, support Honda 77960tha-h030-m2/77960-tha-h020-m2 airbag repair.
6. Support the read-write function of Japanese electrical R7F chip, and more than 70 kinds of chips are supported.
7. Support reading and writing functions of Fujitsu MB91 chip, with 8 chip types.
8. The CG-100 full function version later continues to upgrade will be faster, more stable and more comprehensive.

18 mars 2019

How to install Porsche PIWIS 3 on vas6154 interface?

Classé dans : car diagnostic tool — carsets @ 10 h 03 min
Look here: How to use VAS6154 head with Porsche PIWIS 3
project PIWIS3 PT3G => VAS6154-Kolun a
look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put together vas6154 install the drivers for vas6154-piwis // attempt to update interface Flesch
, if you see 6154 as pt3g then it is ok if nevidi next step =>
4 separated you from laptop
5. Copy the deteskop and install VAS 6154 driver // installation after installation tend to deteskopa the trash
6 interface connects you 6154
7 program you run driver
8 interface you see 6154
9 select USB. Save.
10 restart.
11 tart driver program tach app (the first option above left) choose passthru> pt3g-3 piwis install seeks interface.
12 restart
13 Interface joints run driver VAS6154 seen as a passthru pt3g update memory device, check the USB version pt3g dal see you ok almost 6154
Note: please be careful and do it on your own risk. will not give support
Contributor: ibi1961
Update: Unless you find the 08 firmware
The picture below is VAS 6154
For sake of security, you’re advised to use odis with vas6154 and use piwis with porsche tester 3
with relief!
Piwis III V37.250.020 – confirmed to work no issues with Vxdiag Porsche
Diagnostic test: passed
Coding: passed
Programming: passed
attached vas6154 driver download, installation instruction, wlan setup….

15 mars 2019

Autel MaxiCOM MK908P and MaxiSys MS908P Difference

Classé dans : car diagnostic tool — carsets @ 7 h 23 min

What’s the difference among Autel full system diagnostic systems, MaxiCOM MK908P, MaxiSys Elite, MS908P and MS908?

Product MaxiCOM MK908P MaxiSys Elite MaxiSys MS908P MaxiSys MS908
Image mk908p maxisys-elite maxisys-ms908p maxisys-ms908
CPU Samsung Exynos hexa-core Processor NVIDA Tegra 4-PaLUS-1 Quad-core Processor 1.8GHz Samsung Exynos hexa-core Processor 1.4GHz Samsung Exynos hexa-core Processor

IOS AndroidTM 4.4.2 KitKat Android 4.4.4 KitKat Android 4.0 ICS Android 4.0 ICS
Memory 64GB 32G 32G 32G
Touch Screen 10.1″ 1920*1200

Retina LCD
9.7″ 2048*1536

Retina LCD
9.7″ 1024*768

LED Capacitive
9.7″ 1024*768

LED Capacitive
VCI Connection USB 2.0/WLAN/BT USB 3.0/USB2.0/

WiFi 2.4GHz 2.4 & 5GHz 2.4 & 5GHz 2.4 & 5GHz
Internal battery 15000mAh

3.8 V

3.7 V

3.7 V

3.7 V
Weight(Display) 3.26 Ib. (1.48kg) 3.5 Ib. (1.59kg) 3.12 Ib. (1.42kg) 3.2 Ib. (1.42kg)
Camera (Rear) 8.0 Megapixel, AF with Flashlight 8.0 Megapixel, AF with Flashlight 5.0 Megapixel, AF with Flashlight 5.0 Megapixel, AF with Flashlight
Wireless VCI MaxiFlash elite MaxiFlash elite MaxiFlash elite Wireless interface

✔ ✔ ✔ ✔
Complete OEM

Specific Scanner
✔ ✔ ✔ ✔
Auto VIN ✔ ✔ ✔ ✔
Maxifix Cloud

Based Info
✔ ✔ ✔ ✔
Shop Manager ✔ ✔ ✔ ✔
ECU Coding Advanced Advanced Advanced Advanced
ECU Flash

✔ ✔ ✔ Optional w/Maxiflash kit
1996-2001 connector kit ✔ ✔ ✔ ✔
MaxiFlash Elite ✔ ✔ ✔ Optional
Diagnostic Target Passenger vehicles & Light duty trucks Passenger vehicles & Light duty trucks Passenger vehicles & Light duty trucks Passenger vehicles & Light duty trucks
In conclusion:
The MK908P is an upgraded version of MS908P, and the difference between them is that MK908P is equipped with more advanced hardware.
Processor: The MK908P is processed by the powerful Samsung Exynos hexa-core Processor (1.3GHz Quad-core ARM Cortex-A7 + 1.7GHz Dual-core ARM Cortex-A15) while the MS908P is using the Samsung Exynos Quad-Core Processor 1.4GHz.
Operating System: Diagnostic scan tool MK908P features Android4.4.2, KitKat operating system that is upgraded from Android 4.0, Ice Cream Sandwich.
Memory: The MK908P is equipped with 2GB RAM & 64GB on-board Memory, but MS908P only has 32GB on-board memory.
Screen Size & Pixel: The Automotive diagnostic scanner MK908P features 101.1 inches LED screen with 1920*1200 resolutions that provides a better user experience than MS908P’s 9.7 inches screen with 1024*768 resolutions.
Camera: The camera of MK908P is designed to provide a more detailed images using 8.0 Megapixel, AF with Flashlight.
Battery Capacity: For a tablet diagnostic tool that is equipped with built-in battery, the battery life greatly affects the integrity of the diagnosis and the user experience. Compared to the MS908P, the MK908P extends the usage time by increasing battery capacity by 4000mAh.

9 mars 2019

Xprog Reset AEC302C AEC400 CDI controllers

Classé dans : ECU chip tuning tool — carsets @ 3 h 42 min

Manufacturer of AEC302C / AEC400 CDI controllers didn’t left possibility to access internal MCU memory by K-Line. Therefore it is really possible to reset them if you have any MOTOROLA MC68HC05E6 programmer (XPROG / XPROGm, UPACARPROG, ELNEC, etc.).

Opening the plastic casing




Make a cut around plastic casing to gain access to the printed circuit board (PCB). Don’t cut too deep – you can damage electrolytic capacitors near the edges of plastic casing! Clean the PCB from epoxy sealant. It is significantly easier to clean if sealant is heated using hot air station or other source of hot air (fan, etc.) – it becomes crumbly and comes out without excessive effort.

How to connect MCU programmer


NOTE. Wire colors in the picture, corresponds to CARPROG cable A10. Signal symbols B2, B3, B5, B6, Vcc, Vpp – to XPROG / XPROG-m programmer.

MCU settings for programmer

MCU type: MC68HC05E6
Mask set: 0F82B
EEPROM start: 0×0100 (hex)
EEPROM size: 0xA0 (160 bytes)
Osc. Frequency: 4 MHz

How to reset CDI controller to NEW


Change data at marked position from 00 to 01. This way you will change CDI controller state to NEVER PROGRAMMED. CDI controller is ready now to store new code on the first time ignition is switched to ON with a master key.

NOTE. Ignition must be switched on with valid MASTER key that belongs to immobilizer controller IMM003 / IMM006.

5 mars 2019

Download Toyota Techstream 14.00.018 for Mini VCI

Classé dans : car diagnostic tool — carsets @ 8 h 25 min
(03/2019) Free download TOYOTA Techstream V14.00.018:!fN5nnCrZ!zyvzw682pUp31tbMS6ZJng-IE6VcErJO94hTg31DCzA
date: 01.03.2019
version: 14.00.018
size: 194.4 mb
password: not required
activation: only via Autokent at
security: unknown, not tested yet by pros and not tested with any Toyota diagnostic tool
suggestion: you’d better to use a tested version for use with safety
version 13.00.022 Techstream is the latest ver. you can use with relief
have tested 100% with real professionals working for
no password and activation!
confirmed to work with:
mini vci cable for Toyota customization
vxdiag vcx nano Toyota for diagnostics and programming (test: H chip all keys lost – done!)
mini vci cable tested:
vxdiag toyota tested:

26 février 2019

Nissan Consult III Plus v82.11 -82.50 free download

Classé dans : car diagnostic tool — carsets @ 4 h 12 min

This is the last version of Nissan CONSULT III plus wich is working with J2534 PassThru API 04.04.
From 83.xx versions – API 05.00.



English/ French/ German/ Spanish/ Italian/ Japanese/ Portuguese/Russian/ Finnish/ Greek/ Chinese(Simplified)/ Chinese(Traditional) etc


Operating system: Windows XP , Vista, and Windows 7/8  operating system.


Nissan Consult 3 Plus v82.11 + v82.21 + v82.41 + 82.50 free download!WwRDSCxT!6c7V6G4wKRKJjCSkBBwVyI13UWRh-zmOC5wWmIEd2Vo\


You are at your risk.



Region: All Region
Type: Diagnostic software
Version:  v82.11 + v82.21 + v82.41 + 82.50
System Requirements: Panasonic Toughbook CF-19, + VI2
Language: Multilingual
Year / Date: 2018
Date Of Update: 09/2018
License: Freeware


The accurate and speedy diagnosis of a vehicle’s problem has become increasingly complicated as more sophisticated electronic hardware is fitted in vehicles, combined with a significant increase in the number of computers connected to the Controller Area Network (CAN). In the past five-year period, the number of computer systems fitted in today’s vehicles has doubled from only approximately eight in 2001. Nissan Consult 3 plusis specifically designed to address these complex and advanced in-vehicle electronic devices, enabling accurate diagnosis and repairs and shortening waiting times for customers.

22 février 2019

All details About vas 6154 wifi obd2 scanner

Classé dans : car diagnostic tool — carsets @ 4 h 06 min
Look here: all details for vas 6154 head (esp. china clone)
vas 6154 price: 69 usd (22% off)
where to:
vas 6154 driver:
vas 6154 driver download!8LAikSQK!g05ClEGjMjFG7IwSU3PDBginUHvbckoyJCUlrLUY3sQ
vas 6154 installation:
vas 6154 windows 7: confirmed to work
vas 6154 windows 10: no luck
I will prefer you to use windows 7 for all the diagnostic devices, this is because of the security of the windows 10. The best way to get a good working diagnostic program is to have one and only laptop for this. A clean windows 7 is the best way.
Have a try on Win 7 32 bit and 64. both have the luck
32bit: x86 is soooo much better since there is no any lack of the functionality for any kind of driver of ur laptop , I test both x86 is better and u can install both yes ODIS-S and ODIS-E
64 bit: I installed on win7 64bit and it installed and I added the update file from the download, starts and works very well
vas 6154 usb setup:
There are two vas6154 china version, one with a wireless module and the other without it.
But both come with a USB module.
vas6154 wireless setup:
vas 6154 wifi setup: yes!
vas 6154 bluetooth setup: no!
Vas 6154 china clone CANNOT connected via Bluetooth, but WiFi available for wireless connection
Look here: How to set up vas 6154 wifi:
Step1: Input the fourth CD and open it and then install the vas 6154 driver
Step 2: Open the CD and then chose the vas 6154 driver to install
Step 3: After installed and click on the Desktop – symbol
Step 4: Click on the Device Configuration
Step5: Choose the connection way “WLAN”
Step 6: Choose the “save”
Step 7: Plug the vas 6154 to the car
Step 8: Open the WIFI and find the VAS-6154 wifi name and connect it.
Step 9: It shows Connected
Step 10: The state of connect successfully
Step 11: Open odis software. Now the latest version is 4.4.1
Step 12: VAS 6054 wifi connection setup successfully.
Done! Ready for use!
vas 6154 reviews:
  1. Clone vas6154 = Odis offline
vas 6154 clone will never work with odis online. Only oem SN of 6154 will work with odis online, all 6154 clones will be on the black list. Vw could not lock the SN Clone for 5054 but could lock the SN Clone for the 6154.

Summary: Anyone who wants to use odis online must purchase oem 6154.

Clone 6154 = Odis offline

  1. enough for users
it works 100% and has unique features. I think it is enough for users
  1. defined as vas5054a
Program clone, is defined as 5054. but 6154 supports wireless.
  1. wireless connection and stable
Vas 6154,can be connected by wireless connection, and the function is very stable.
  1. cable extender for audi obd2
I am not sure if it is an upgraded version from vxdiag vcx nano or a downgrade. However vcx nano due to size it needed a cable extender in order to fit in an audi obd2 connector. This is the main difference with VCX6154. VCX nano being similar to VCX nano pro enjoys the same firmware frequent upgrades, however only pro version can be added with more license add ons for different makes.
VCX can be powered by usb port which means it can be upgraded easily using then vcx app. vcx nano worked perfect with odis-s 3.0.3 and in addition now comes with with api-pdu 1.20.040 support which means odis-s 4.1.3 compatibility. However with odis-e dont expect you will be able to flash successfully.
Please keep us posted with your findings regarding the newer VCX 6154 especially flash capability.
  1. different from the genuine
different from the real vas6154, but i focus on the functionality, regardless of genuine or clone.
the clone vas6154 pcb


the genuine vas 6154 pcb





21 février 2019

Renesas H8SX R5F61721 Read Flash by Diatronik and Gprog

Classé dans : car diagnostic tool — carsets @ 4 h 56 min
How-to: read RENESAS H8SX R5F61721 flash by JTAG.

What you need: 

Diatronik SRS OBD Tool/CarMasterX/GromCalcTool

GPROG LITE SL adapter 

Open Gprog software

Select Device->MCU->Renesas H8SX JTAG->R5F61721

Select ID ROM->Read
Read R5F61721 (ID ROM) OK
Select Main Flash
Read R5F61721 flash
Read R5F61721 flash ok

20 février 2019

Program Honda CRV 2015 3-button Remote Key with Lonsdor K518

Classé dans : car key programmer — carsets @ 7 h 12 min
How to make a chip key with auto start on the Honda CR-V 2015. In the key chip ID49 Hitag 3 (Hitag pro). The remote control buttons are automatically programmed. Key rogramming is done with the Lonsdor K518ise key programmer.
Remote key 3 buttons
Note: DO Follow each IGN ON/OFF operation.
Connect K518 host with vehicle via OBD Socket
Select Immobilizer->Honda->Select from vehicle->CR-V->2012 up-> Immobilizer->Search Immo Type->Immo Type








Turn on ignition switch
Lonsdor K518 identified the immo type 2
Then go back to select IMMO2 and Add Key
Insert registered key and switch ignition ON
Turn off ignition in 15s
Turn ignition on with original key in 17s
Turn off ignition in 17s
Turn on ignition with a new key in 20s
Turn off ignition in 17s
Turn on ignition switch without replacing key in 20s
Turn off ignition in 15s
Turn on ignition
Check if the immobilizer indicator goes off


If yes, turn off ignition in 15s
Switch ignition on
The new key has been successfully programmed
Test all keys.

19 février 2019

Lonsdor K518ISE Adds a Remote Key to Ford Mondeo 2016

Classé dans : car key programmer — carsets @ 8 h 27 min
Here’s the procedure to duplicate a key for the 2016 Ford Mondeo with key chip ID49 Hitag 3 (Hitag pro). The remote control is automatically programmed. Key programming is done with the Lonsdor K518ISE key programmer.
Two keys are required. Original key and a new key (3-button remote).
Turn on ignition switch with original key
Select Immobilizer->Ford->New Mondeo-> pre-2017->Immobilizer->Add key






You can check Lonsdor K518 manual to add key or program all keys lost




Switch ignition off
Read VIN and key numbers
Insert a new key and turn on ignition
Programming in procedure
Identify number of programmed keys: 3
Program complete.
Test the remote control and start car.

Gaskustoms |
Mon Deux-Roues |
Autopassion34 | | Créer un blog | Annuaire | Signaler un abus | Handlebar
| Noirmatpeinturecovering
| Coveringmatvoiture